Laser Sensor is used to directly measure the natural vibration Frequency of the belt, combined with the input belt mass and free length to calculate the tension, Measurement range 10Hz~ 500Hz, split Sensor size can penetrate into 66mm narrow space, support Metric Imperial Unit switch.
Adopting stainless steel shell, the belt is equipped with a sink to collect grinding materials, the belt adjustment device can adjust the tightness, Rotation speed 1400rpm, Power 0.55kW, easy operation and maintenance.
Laser Sensor is used to directly measure the natural vibration Frequency of the belt. Measurement range is 10Hz~ 800Hz. The size of the split Probe is only 124 * 21 * 12mm. It can penetrate into a small space of 66mm and supports metric and imperial Unit switching.
Laser Sensor is used to directly measure the natural vibration frequency of the belt. Measurement range is 10-800Hz. The split probe size is 124 * 21 * 12mm and can penetrate into a small space of 66mm. It supports metric and imperial unit switching.
Laser Sensor is used to directly measure the natural vibration frequency of the belt. The size of the split probe is only 124 * 21 * 12mm, which can penetrate into the depth of 66mm. Measurement range is 10-500Hz, and it supports metric and imperial unit switching.
Measurement frequency up to 680Hz with accuracy in the range of +/- 1Hz to +/- 1%, suitable for transmission system vibration detection.
Real-time display of tension value and accompanied by sound and light indication, no need to continuously observe the screen; automatic storage of upper and lower limits and calibrated data, power failure is not lost; Measurement range 0-750N, accuracy +/- 5%, support a variety of unit conversion.
Using quartz time base technology to ensure accurate measurement, Maximum Measured value 750N, Real-time display of tension data and support for voice prompts, automatic storage of upper and lower limit setting values, providing USB, RS-232 and Bluetooth Data output methods.
Equipped with a servo motor and a synchronous belt reduction mechanism, it ensures smooth transmission and low noise. It features a touchscreen operation and real-time LCD display, offering stable and reliable performance with protection functions such as overcurrent, overvoltage, and overload.
Adopt servo motor and synchronous belt deceleration mechanism, force value Precision +/- 1%, speed range 0.1-500 mm/min, transmission smooth and low noise, Operating interface is LCD screen display, support tensile compression test.
Equipped with 2kw lamp tube to achieve instant curing, the transmission speed is adjustable from 1 to 7m/min, the irradiation distance is 100 to 200mm, the feed height is adjustable from 0 to 90mm, and the mesh belt width is 200mm, which can adapt to different pRoduction needs.
It adopts a servo motor and a synchronous belt reduction mechanism, ensuring stable and reliable performance with over-current, over-voltage, and overload protection. The transmission part uses an arc synchronous toothed belt and a precision ball screw, providing smooth operation, low noise, and high efficiency.
Measurement range of 5-55 ℃, with saturated calomel single salt bridge design, ceramic core salt bridge material to ensure stable potential, the shell is made of Glass.
Measurement range 0~ 1500μm, accuracy +/- (5μm + 5%), stylus end angle of 60 degrees, suitable for surface profile measurement, with line design for easy connection.
Stepper motor direct drive to ensure accurate Rotation speed, Measurement accuracy of +/- 1% F. S, repRoducibility +/- 0.5% F. S, viscosity range 160~ 320000000mPa · s, LCD LCD with backlight display shear rate and stress.
