The integrated high voltage generator is used to overcome static electricity, the performance is stable and reliable, the output high voltage 2~ 30KV stepless continuous adjustable, the detection Film thickness range 0.05-15 mm, nickel-metal hydride battery power supply is suitable for field operations.
Frequency range 20KHz to 100KHz, Sensitivity indicated by LED and sound, weight of only 140 grams for portable, suitable for a variety of gas and air leak detection scenarios.
Electric Pump with double oil path plunger, high voltage 63MPa, Measurement accuracy +/- 1.5%, Peak hold and Data storage function, Hollow structure is convenient for anchor cable detection and operation.
Film thickness 0.1-15 mm, output high voltage 0.8-30 KV stepless adjustable, using integrated high voltage generator to overcome static electricity, sound and light alarm function is suitable for different coating mass detection.
With automatic self-inspection certificate voltage Adjustment, detection voltage 9V to 90V adjustable, thickness range 0~ 500μm, meet IP65 Protection Rating and weight only 180 grams easy to carry.
0.6KV~ 31.5KV full scale high voltage output, voltage accuracy +/- (0.1KV + 3% reading), intelligent control to ensure that the display voltage is the test voltage, pulse discharge to reduce coating secondary damage, sound and light alarm and leakage point counting function.
Glass-lined, FRP, epoxy coal asphalt coatings of different thicknesses can be mass tested by high voltage detection technology. When the coatings have defects such as pinholing and bubbles, the instrument will emit bright sparks and sound and light alarms.
Double oil piston pump design, high voltage 63MPa, hollow double oil cylinder center aperture 65mm, with graded unloading function and peak holding, can store 50 data, convenient and reliable operation.
Using high voltage DC technology, the maximum detection thickness is 36 mm, the voltage range is 0-30kV fully adjustable, with current limit protective coating and Sensitivity adjustment function, suitable for metallization or slightly wet coating detection.
Using 2-wire method and 3-wire method measurement, Ground Voltage Measurement range 0~ 200V, Ground Resistance Measurement range 0~ 1999 Ω, Response Time about 5 seconds, with continuous measurement and overload protection function.
Observation angle 0.2 °~ 2.0 ° continuously adjustable, incident angle -40 °~ + 40 ° adjustable, using silicon diode Detector and lithium battery power supply, support continuous work for more than 30 hours, suitable for indoor and outdoor measurement.
0.6KV~ 31.5KV full scale high voltage output, voltage Accuracy +/- (0.1KV + 3% reading), intelligent control automatically match Coating thickness, pulse discharge to reduce secondary damage, prolong battery life.
Hollow cylinder center aperture 60mm, maximum tension 500KN, piston Travel 120mm, using quick connector connection, manual pump with high voltage 63Mpa working capacity, suitable for a variety of anchoring physical examination.
Hollow cylinder center aperture 75mm, maximum tension 800KN, piston Travel 120mm, compact structure and easy to carry, manual pump with high voltage 63Mpa working capacity, can directly read the tensile value.
Adopt compressed air power, torque up to 80N.cm, with strong load starting ability; explosion-proof and spark-free design, operation safety is not affected by the environment; equipped with self-locking collet and adjustable fixing clip, smooth operation.
