A wet film with a film thickness of 50~ 675 μ m was prepared by using a coating scraper, and the sag property was observed when placed vertically. The maximum thickness without sag was expressed, which was suitable for Paints testing.
Film thickness range 650~ 875 μ m, Graduation 25 μ m, stainless steel material, Dimension 120 * 22 * 20mm, suitable for the determination of relative sag of Paints.
Made of stainless steel, the film thickness range is 250~ 475μm, Graduation 25μm, Dimension 120 * 22 * 20mm, suitable for standard sag performance testing.
Spreader 5 kinds of film thickness, the other side of the test sag cover 10 kinds of thickness 75-300 microns, stainless steel material acid and alkali resistance, in line with ASTM standards, easy to accurately evaluate film performance.
The multi-groove coating scraper can scrape 10 wet-films of different thicknesses at one time, the thickness difference of adjacent films is 25um, and the wide film thickness range of 50-675um is supported. It is convenient to visually observe the sag situation by placing the test plate vertically.
The stainless steel material ensures durability, the film thickness range is 450~ 675 μm, and the groove difference is 25 μm, which is convenient for accurate determination of Coating sag on site.
Using 15.5cm/min ink wiping speed, equipped with 0.1mm ink coating platen, the test process is precisely controlled by 4.3 inch Touchscreen, which can accurately determine the absorption capacity of the material to the inks vehicle.
The device can pRoduce 10 different film thickness stripes, film thickness range 250-475μm, Graduation 25μm, suitable for vertical position testing, to help evaluate coating sag tendency and ensure stable test conditions.
Dual function design can test leveling and sag at the same time, flow plane supports 5 kinds of film thickness Spreader, flow surface provides 10 kinds of film thickness range 75-300 micron, stainless steel material is acid and alkali resistant, in line with ASTM D4400 and D2801 standards.
Automatic ink running stability, ink time and speed can be set, printing pressure 0~ 2mm adjustable, provide low, medium and high three printing speed, each time can be proofed 4 colors to facilitate Color contrast.
The ink wiping speed of the instrument is 15.5 +/- 25px/min, the ink absorption time is 120 +/- 5s, and the 4.3 color Touchscreen control can accurately evaluate the acceptance of inks and the absorption capacity of the vehicle.
The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
The ink wiping speed is 15.5cm/min, the opening area of the ink coating platen is 20cm ², and the ink absorption time is 120s. The test process is automatically controlled to accurately determine the absorption capacity and penetration performance of the paper to inks.
It can simultaneously print color bars of different Colors or Ink Film thickness, detect inks Hue and Gloss, uniform ink time can be adjusted from 1 to 800 seconds, support dry and wet ink discoloration analysis and abrasion resistance testing.
The equipment supports 0-2MM pressure adjustment, providing three-speed printing speed (10/15/20 rpm) and uniform ink speed (650/800/1000rpm), which can imprint 2.5mm thick paper and 1mm plastic film to achieve precise uniform ink and stable operation.
