Heating power 800W, speed range 0-2600 rpm, support vacuum reaction and pressure reaction for a long time stirring, with durable magnetic steel and PTFE stirrer.
The pumping rate reaches 60m ³/h, the ultimate pressure is as low as 0.005mbar, the forced oil pump lubrication system ensures stable operation, the special gas ballast valve accelerates the extraction of steam, and the built-in check valve protection system. The noise is only 58dB, and the parts are few and easy to maintain.
DC brushless motor design, Rotation speed 0~ 2000rpm, put in the stirrer without hopper; double-decked thermal insulation structure, rapid heating and prolong the life of the host; built-in over-temperature protection device, safe and reliable use.
Measurement range 0~ 1250μm, resolution 0.1μm, support F-type and NF-type Probe, which can measure the thickness of cover layer on magnetically permeable and non-magnetically permeable substrates.
Using three-phase brushless DC motor to achieve 50-1500rpm stable speed regulation, temperature control accuracy +/- 1 ℃ and with temperature protection function, soft start design to prevent stirrer beating, suitable for long-term unmanned operation.
Using magnetic Induction and eddy Current dual principle, Measurement range 0~ 500μm, resolution of 0.1μm, wear-resistant hard metal probe and Automatic calibration function, support USB data communication.
Measurement range 1.2~ 200mm, resolution 0.1mm, coupled state prompt and RS-232C data output function, adapt to different Frequency Probe.
Measurement range 0.75-350 mm, can store 2000 sets of data, with adjustable Speed of sound, upper and lower limit alarm and coupled prompt functions, suitable for harsh environments and supports high temperature Probe.
Speed range is 300-23000 rpm, and the internal suction homogeneous structure can effectively homogenize, emulsify and extract. Stirrer can be used at low speed.
Adopt magnetic Induction principle to measure 0-1250μm thickness, equipped with line Probe measurement groove and narrow area, support single point and two point calibrating, with automatic matrix recognition and undervoltage prompt function.
Equipped with a 200mm diaMeter pick-up cylinder and an 8-liter capacity, the manual Stirrer works in tandem with an 80-mesh forming filter for uniform Pulp distribution and efficient dehydrating.
Adopt magnetic Induction principle to achieve 0-1250μm range measurement, equipped with large Probe to improve Stability, support single continuous two Measurement mode, with Automatic calibration and matrix material identification function.
The integrated pump body structure is adopted, and the oil pump is forced to lubricate and control. The ultimate pressure is as low as 0.005mbar, the noise is only 58dB, and the parts are few and easy to maintain.
Using electronic constant force speed control circuit, digital direct display Rotation speed, Power 500W, Speed range 100-2000rpm, low reliable operation noise, can calculate the relationship between stirring line speed and chemical reaction rate.
Adopt sealing solvent system to reduce water vapor interference, support 100 titration methods, Measurement range covers 1ppm to 5%, built-in automatic drift correction function, equipped with electronic adjustment Magnetic Stirrer.
