Maximum displacement value 150mm optional, digital display resolution 0.01mm, Indication Error ≤ +/- 1.5% F. S, powered by lithium battery for up to 400 hours.
Electric Pump with double oil path plunger, high voltage 63MPa, Measurement accuracy +/- 1.5%, Peak hold and Data storage function, Hollow structure is convenient for anchor cable detection and operation.
Hollow self-resetting structure, maximum pulling force 10kN, piston Travel 25mm, with 100 data storage and peak hold function, compact and portable structure.
Maximum pulling force 30kN, hollow self-reset structure, digital pressure Gauge with automatic calculation and peak holding function, manual pump maximum Operating Pressure 63MPa, compact and portable structure.
Contains RS232 data cable and software CD-ROM, which can be connected to a PC for data management operations. It is suitable for all Coating thickness Gauges except CM8829 series.
Equipped with RS-232 software system, the Probe cable is 1 Meter long and supports the connection between the measuring instrument and the computer, which is convenient for data transmission and processing.
1KW standard blowtorch, flame height 170-190mm, support 0.1-999 seconds holding time setting, with automatic timing and high voltage ignition function, suitable for flame retardant performance testing of various cable materials.
Adopting digital signal modulation technology, the output signal is 125 kHz, and the LCD display screen is equipped to display the signal change in real time, which can detect the location and fault of buried cables, and the tracking depth can reach 2.5 Meters.
A set of 8 different specifications of anchors, covering the diaMeter range of Φ 6 to Φ 20, is specially designed for bolt pullers to meet a variety of testing requirements.
Maximum pulling force 50kN, hollow self-reset structure, digital pressure Gauge with automatic calculation, backlight, peak holding function, manual pump maximum Operating Pressure 63MPa, compact and portable structure.
The hollow self-resetting hydraulic cylinder is designed with a central aperture of 18mm and a maximum pulling force of 30kN. It has a compact structure and can be connected by a quick connector. It is suitable for the force value detection of various anchors.
The central aperture of the hollow self-resetting hydraulic cylinder is 27mm, the maximum pulling force is 100kN, and the maximum Operating Pressure of the manual pump is 55MPa. The structure is compact and easy to carry.
The central aperture of the hollow self-resetting hydraulic cylinder is 35mm, the maximum pulling force is 300kN, the structure is compact and easy to carry, and the manual pump can be used as a general high voltage oil power source.
The central aperture of the hollow self-resetting hydraulic cylinder is 34mm, the maximum pulling force is 150kN, and the digital pressure Gauge can directly read the tensile force value. The structure is compact and the manual pump can be used as a general high voltage oil power source.
With 1000KN Measurement range and 50mm displacement detection capability, it can simultaneously monitor tensile displacement temperature paraMeters, support 1000 Data storage and USB Communication interface, and adopt overload protection structure to ensure safe use.
