The equipment has a 15-liter large-capacity water Tank and an 8mm inner diaMeter water pipe, supports 0 to 99 hours of time control, adopts stainless steel structure and automatic control device, and is suitable for coating stain resistance testing.
The equipment is designed according to the international coating stain resistance experimental method, the water Tank volume is 5L, the inner diaMeter of the flow pipe is 8mm, and the time control range is 0~ 99h99s. It is suitable for the stain resistance test of building exterior coatings.
Irreversible Color change for long-term temperature recording; Resistant to oil, water and steam; Temperature accuracy is +/- 1 ° C below 100 ° C and +/- 1.5 ° C from 100 ° C to 154 ° C; Self-adhesive design for easy use and storage.
Adopt stainless steel water Tank structure, equipped with 8mm inner diaMeter flow pipe, support 0-99 hours time control, can realize automatic flushing and multi-directional test of sample.
The eight-stage deep purification system ensures that the water quality is pure, the resistivity of the pRoduced water is 18.25MΩ .cm, and it is equipped with an intelligent Control system to realize automatic monitoring and a variety of water intake modes to meet the strict experimental requirements.
Using irreversible discoloration technology, accuracy of +/- 1 ℃ to +/- 4 ℃, oil and water resistance, Temperature range 199 ℃ to 232 ℃, providing long-term temperature recording, easy to paste and remove.
Adopting the principle of irreversible discoloration, the accuracy is +/- 1 ° C below 100 ° C, with 6 temperature grids from 65 ° C to 93 ° C, oil, water and steam resistance to ensure stable operation in harsh environments.
4-Terminal Resistance Measuring method is used to eliminate the influence of wire resistance. Test speed is up to 6 times/sec. Measurement current is less than 100mA to prevent temperature drift and ensure Precision and Stability.
The double outlet design can pRoduce UP water and RO water at the same time, the water pRoduction capacity is 10L/H, the resistivity of UP water is > 10MΩ · cm@25 ℃, and the fully enclosed pipeline design and automatic timing flushing function are adopted to ensure the stability of water quality.
The double water outlet design can provide both UP and RO water simultaneously, with a water pRoduction capacity of 20L/H, a fully enclosed pipeline to maintain stable water quality, automatic timing flushing and water shortage protection functions, and quiet operation with noise below 40 decibels.
Water-jacketed structure ensures uniform and stable temperature, and can still maintain thermostatic for a long time after power failure; High Accuracy Platinum Resistance Sensor, Temperature Fluctuation is only +/- 0.1 ℃, Uniformity +/- 0.2 ℃; with automatic water level alarm and over-temperature protection function.
Irreversible discoloration provides permanent temperature recording, Measurement accuracy +/- 1.5 ℃, oil resistance, water resistance and steam resistance performance, Instant Response to temperature changes, Round single grid design for easy observation.
Using 2-wire method and 3-wire method measurement, Ground Voltage Measurement range 0~ 200V, Ground Resistance Measurement range 0~ 1999 Ω, Response Time about 5 seconds, with continuous measurement and overload protection function.
Irreversible discoloration records the highest temperature, accuracy +/- 1 ℃ to +/- 4 ℃, oil resistance, water resistance and steam resistance, instant Response and can be pasted in the inspection report for storage.
Tank volume 18 liters, total power 1500W, using intelligent integrated circuit and LED display, temperature reading intuitive and accurate, suitable for a variety of experimental operations.
