The maximum temperature is 1000 ℃, the Furnace volume is 30L, the 30-segment programmable controller is used to realize automatic operation, the Furnace door sealing is good to ensure Temperature uniformity, the refractory brick Furnace and the resistance wire heating element are resistant to high temperature and have a long life.
Adopting the principle of high-frequency electromagnetic wave induction, scanning depth 50mm, Response Time 1 second, support multi-gear measurement and plug-in rapid detection, small size for on-site use.
The maximum temperature is 1200 ℃, the Furnace volume is 2L, the microcomputer PID controller is used for precise temperature control, the door sealing design enhances Temperature uniformity, and the corrosion resistance refractory brick Furnace is durable.
40KHz high-frequency cleaning technology effectively solves the problem of blind spots, with a circuit conversion efficiency of up to 98%. It is equipped with stainless steel Tanks and drainage devices, and supports 1-99 minute timing and 0-80 ° C temperature control.
Using 40KHz high-frequency ultrasonic technology, the cleaning effect is remarkable; 15L large-capacity inner Tank design can handle many items; 1-30 minute timing function, flexible and convenient operation.
The maximum temperature is 1200 ° C, the Furnace volume is 16L, and the 30-segment programmable control is used to achieve precise temperature control. The safety switch of the Furnace door and the design of the corrosion resistance Furnace improve the operation safety and durability.
Maximum temperature 1000 ℃, temperature control accuracy 1 ℃, using high aluminum liner and upper and lower left and right 4-sided heating design, with 30 program settings and over-temperature protection function, uniform temperature in the Furnace.
With 30 programmable control function, support heating or stay setting, stainless steel Furnace door and microcomputer PID controller, to ensure accurate and reliable temperature control, Furnace Temperature uniformity.
With two-way door design to effectively prevent hot gas leakage, 30-stage multi-stage programmable control to achieve accurate temperature control cycle, Furnace Temperature uniformity and corrosion resistance, the maximum temperature 1200 ℃ Power 2.5KW.
The maximum temperature can reach 1200 ℃, Furnace volume 7L, using microcomputer PID controller precise temperature control, refractory brick Furnace durable, Furnace door sealing design to enhance Temperature uniformity, safe and simple operation.
The highest temperature is 1300 ℃, the Furnace volume is 4L, the silicon carbide Rod heating element is resistant to high temperature and oxidation, the microcomputer PID control is accurate and reliable, and has multiple Safety protection measures.
High borosilicate Glass material, corrosion resistance and high and low temperature resistance, strong ability to withstand thermal Impact; vacuum negative pressure can reach 0.095MPa, support material reaction under negative pressure; Overhead Stirrer Rotation speed 50-500rpm, torque 70N.cm, suitable for a variety of viscosity materials.
With 30-stage programmable control function, the maximum temperature is 1000 ℃, the Furnace volume is 2L, the refractory brick Furnace and stainless steel material are used, and the heat loss is small and the Temperature uniformity is good.
30L large-capacity Furnace with 1200 ℃ high temperature range, using refractory brick insulation material and intelligent PID temperature control system, with over-temperature protection and power-off recovery function, to ensure the safety and reliability of the experiment.
The highest temperature up to 1000 ℃, Furnace volume 16L, the use of refractory brick Furnace and wirecoil for heater heating, with automatic safety switch and overheating and overpressure protection, Furnace door sealing good heat loss is small.
