Overview
YIHENG SX2-4-13N box type resistance furnace, the maximum temperature is 1300 ℃, using silicon carbon rod heating element, with high temperature resistance, oxidation resistance, corrosion resistance, fast heating, long life, low temperature deformation, safe and reliable. The furnace volume is 4L, the size is 150x250x100mm, the input Power is 2.5KW, suitable for laboratory high temperature treatment.
Features
1. Using refractory brick furnace and silicon carbide rod heating elements, high temperature resistance and long service life.
2. Controlled by a microcomputer PID controller, the operation is simple and convenient, accurate and reliable.
3. Comprehensive safety functions, including furnace temperature safety switch automatically disconnects the heating power supply when the furnace door is opened, and various safety protection measures such as overcurrent, overvoltage and overheating.
4, the door sealing is good, the heat loss is small, the furnace Temperature uniformity is good.
Principle
The box type resistance furnace generates high temperature through silicon carbide heating elements, and the temperature is precisely regulated by a microcomputer PID controller to ensure uniform and stable temperature in the furnace, which is suitable for high temperature processing applications.
Applications
Laboratory high temperature treatment
Steps
1. Connect the power supply and ensure that the voltage is 220V 50Hz.
2. Set the required temperature through the microcomputer PID controller.
3, close the door, start heating.
4. Monitor the temperature to ensure safe operation.
5. After the processing is completed, turn off the power and wait for the chill down.
Notice
• Ensure that the furnace door is closed during operation to avoid heat loss and safety risks.
• Power supply voltage check before use to 220V 50Hz requirements.
• Avoid heating when the furnace door is open to prevent automatic disconnection of the heating power supply.
• Safety protection functions such as overcurrent, overpressure, overheating, etc. are checked regularly.
• Pay attention to protection when handling high-temperature workpieces to prevent burns.
