Overview
BENTING SRJX-4-13L box type resistance furnace is a laboratory equipment using silicon carbide rod heating, with rapid heating and high thermal efficiency. Temperature range 300~ 1300 ℃, furnace volume 4L, PID microcomputer control and precision Sensor combination to ensure accurate temperature control.
Features
1. Integrated design, lightweight and compact structure
2. Closed aluminum silicate furnace, lightweight insulation brick to ensure full use of heat
3. Parallel side-opening furnace door to keep the hot end away from operation
4. PID Microcomputer Air Instrument and Precision Sensor are well combined, and the temperature is accurate
5. Dedicated function keys to achieve temperature setting
6. Auxiliary menu to achieve over-rise alarm, deviation correction, menu lock
7. Optional exhaust device, conducive to ashing
8. Silicon carbide rod heating, rapid heating, high thermal efficiency
9. Safety functions such as over-rise alarm and menu lock
Principle
The box type resistance furnace adopts silicon carbide rod double-sided Heating mode, through the PID microcomputer controller and K-type Sensor cooperation, to achieve precise control of furnace temperature. The stage heating mode is adopted, and the temperature is controlled by the digital tube double-column PID, which has the functions of fixed value operation, timing operation, automatic stop and so on.
Applications
Laboratory heating, material heat treatment, sample ashing, scientific research experiment
Standards
The product information does not mention specific compliance standards
Steps
1. Use the touch of four buttons to set the temperature
2. Select the operation mode: fixed-value operation or regular operation
3. Set Timer Range 0~ 9999min
4. Start the equipment to start heating
5. Observe the measured temperature and set temperature through a 4-digit digital tube
Notice
● Power supply voltage AC 220V/23A 50/60Hz
Check whether the safety device is normal before use
● Pay attention to the high temperature of the furnace body during operation to avoid burns
● Regularly check the status of heating components
● If ashing treatment is required, it is recommended to choose an exhaust device
