Using parallel illumination hemispherical scattering integrating sphere photoelectric receiving mode, the accuracy of light transmitance and haze display is 0.01%, equipped with thin film magnetic fixture and liquid sample Cup, and supports 2000 sets of data storage.
Parallel light path design can measure 100mm thickness material, accuracy +/- 1%, resolution of 0.001%, support field and fixed station two Measurement mode, suitable for a variety of Optical inspection material detection.
Using parallel illumination hemispherical scattering integrating sphere photoelectric receiving mode, the light transmitter and haze measurement accuracy are 0.01%, support U disk storage and USB communication, equipped with thin film magnetic fixture and liquid sample Cup.
Imported linear slide rail to ensure parallel accuracy 0.1 +/- 0.01mm, blade Hardness can be cut steel, sampling thickness 0~ 5mm, special treatment die durable and easy to restore accuracy.
Using parallel illumination hemisphere scattering integrating sphere photoelectric reception mode, light transmitance measurement range 0-100%, haze measurement range 0-99%, with open sample window design, not affected by environment light.
Adopt three-in-one parallel light path design, one measurement of visible light, infrared and ultraviolet transmittance; test aperture 1.3mm, suitable for small size and thick materials; Automatic calibration and large capacity storage function.
16 200ml samples can be processed simultaneously, 4-sided Glass is easy to observe, independent heating prevents backflow to avoid cross-contamination, supports 0-350rpm Rotation speed and 0-100 ℃ water Bath heating, flexible operation to adapt to complex experimental needs.
Heating power 800W, speed range 0-2600 rpm, support vacuum reaction and pressure reaction for a long time stirring, with durable magnetic steel and PTFE stirrer.
It is designed without mechanical heating components, which can dry burn and have no electromagnetic field interference. It only takes 8 minutes to heat up 450 degrees at an extremely fast speed, and the temperature difference of the board surface is 1-3 ° C. Support internal and external temperature Probe switching, equipped with over-temperature alarm and timing function.
Adopting no mechanical heating component design, the temperature rise is 5 ° C per second, the temperature difference between the plate surface is only 1-3 ° C, the internal and external temperature Probe switching is supported, the microcrystalline Pottery and porcelain plate surface is corrosion-resistant and easy to clean, and the speed range is 100-2500rpm stepless speed regulation.
Measurable six paraMeters including UV barrier rate, visible light transmittance, infrared 950nm, 1400nm, Full IR and SHGC, using parallel light design, test accuracy +/- 2%, suitable for large Film thickness Glass, with real-time dynamic self-calibrating function.
The device places the test plate in parallel in the wind tunnel, the wind speed control accuracy is 3 +/- 0.3m/s, the drying time is automatically controlled, and the surface crazing can be visually inspected, which is suitable for the evaluation of coating anti-crack performance.
Based on the principle of flow between parallel plates, it can quickly and accurately measure inks spread under low shear stress. The sample volume is 0.5 +/- 0.003 cubic centiMeters, and the maximum measurement range of the plate is 9cm. It is suitable for inks flowability evaluation.
It adopts parallel light path design, supports 47mm Film thickness material test, and can simultaneously measure ultraviolet 365nm, infrared 940nm and visible light transmittance. It has real-time self-calibrating function, and the operation is simple and fast to display three results.
The device provides 3 +/- 0.3m/s wind speed through axial flow fan in wind tunnel, Timer delay range of 0.01 seconds to 99 hours 99 minutes, can automatically control drying time and eye test plate surface crazing, support parallel test.
