Flow velocity 1.5L/min, reverse osmosis (RO) membrane and purification column, intelligent microcomputer control to achieve automatic operation and online water quality monitoring, effective removal of trace ions.
The water pRoduction rate reaches 5L/h, the eight-stage purification system includes reverse osmosis (RO) membrane and ultra-pure polishing column, the desalination and sterilization rate is over 99%, supports intelligent control and a variety of water intake modes, suitable for laboratory environment use.
Flow velocity 1.5L/min, reverse osmosis (RO) membrane and purification column are used to remove trace ions efficiently, and intelligent microcomputer control realizes automatic operation and online water quality monitoring.
The water pRoduction rate reaches 10L/h, the water intake Flow velocity is 1.0L/min, and the RO membrane intelligent anti-scale washing and automatic domestic circulation system are used to ensure stable water quality and meet the high standard requirements of the laboratory.
The water pRoduction rate is 10L/h, and the eight-stage purification system includes reverse osmosis (RO) membrane and ultra-pure polishing column, providing 18.25MΩ. cm ultra-pure water quality, supporting multiple water intake modes and intelligent control functions.
The eight-stage deep purification system ensures that the water quality is pure, the resistivity of the pRoduced water is 18.25MΩ .cm, and it is equipped with an intelligent Control system to realize automatic monitoring and a variety of water intake modes to meet the strict experimental requirements.
The resistivity of the pRoduced water is greater than 18.2MΩ · cm, the water pRoduction capacity is up to 100L/H, and it is equipped with a 5.1-inch LCD screen to display water quality and temperature in real time. It supports automatic circulation and disinfection functions, effectively prolonging the life of consumables.
Temperature range from room temperature to 60 ℃, temperature control accuracy +/- 1 ℃. Equipped with air purification device and exhaust gas treatment system to prevent cross-contamination and meet environmental standards.
Using U-Tube Reverse Flow BS/IP/RF design, the viscosity measurement range is 60000-300000cSt, which is based on the principle that the flow time of the liquid in capillary tubing is proportional to the viscosity to ensure accurate measurement.
High-power brushless DC motor provides 130mN · m torque, supports a wide range of speed regulation from 50 to 1500rpm, with forward and reverse Stir and bi-directional Stir modes, adjustable commutation time, and temperature control accuracy of +/- 0.5 ℃.
The centrifugal fan with low energy consumption and reasonable air duct design is used to achieve uniform and stable airflow; the average wind speed is 0.25 to 0.45m/s, and the noise is less than or equal to 62dB (A); it is equipped with initial effect and effective Filter to meet the requirements of purification level.
Four-ring Conductivity Detector Probe with three Measurement ranges (0.0 to 199.9 mg/L, 0 to 1999 mg/L, 0.00 to 19.99 mg/L), manual temperature compensation and single point calibrating ensure easy operation and accurate measurement in different environments.
The quasi-closed Glass damper prevents external air flow from penetrating, the dual-gear adjustable air volume system maintains the wind speed of 0.3~ 0.6m/s, the 304 stainless steel countertop is resistant to corrosion and easy to clean, and the purification efficiency reaches 100 levels.
The integrated stainless steel countertop is corrosion resistant and easy to clean, equipped with any positioning sliding door system, the average wind speed is 0.3~ 0.6m/s, the cleanliness level is up to 100, and the pre-Filter quick replacement design is safe and convenient to use.
The integrated stainless steel countertop is corrosion-resistant and easy to clean, and is equipped with an arbitrary positioning sliding door system for flexible positioning. The average wind speed is 0.3~ 0.6m/s to ensure stable airflow, the cleanliness level is 100, and the vibration half peak is ≤ 3μm to ensure the operation accuracy.
