Heavy-duty stainless steel structure ensures stable support, equipped with 3 strong magnets for firm adsorption, maintaining the vertical state of Microscope, suitable for various metal surface fixing needs.
Adopt horizontal press measurement and physical positioning observation window, density Repeatability ≤ 0.001D, chroma Repeatability dE * ab ≤ 0.03, provide nearly 30 kinds of Measurement parameters and more than 30 kinds of evaluation Illuminants, and support connection PC software and mobile end applications.
Colorimetric integrated tube design, no liquid transfer, measurement error ≤ +/- 5%, Repeatability ≤ +/- 5%, support more than 10 measurements to take the average, built-in 30,000 data storage and thermal printer.
The principle of thermal radiation is used to keep the liquid temperature below the boiling point and avoid water droplets in the gas. The double condensation cycle design improves the extraction effect of pure water, and the output of pure water reaches 800-1000ml/hour. No heavy metals are detected by flameless atomic absorption analysis.
Using 15.8mm diaMeter steel bar and 9.1kg/10kg weight, the Impact height is adjustable at 610mm or 1000mm, and the battery deformation and safety risk are evaluated by simulating the impact of heavy objects.
Impact height of 1250mm, support 300g and 1000g drop weight mass, equipped with Φ 12.7mm and Φ 15.9mm punch, can pass/fail and grading test, suitable for a variety of material testing.
Impact height 0-100cm adjustable, Graduation 1cm; equipped with a variety of hammer mass such as 1000g and punch diaMeter such as Φ 12.7mm, support accurate deformation testing, suitable for coating impact resistance evaluation.
Using 2000g heavy hammer and 16mm punch, Impact depth 2.5mm, no secondary rebound phenomenon, to ensure accurate and reliable test results.
The instrument employs the principle of heavy hammer impact, with a drop height adjustable within the range of 1000 ± 5 mm and a hammer mass of 500 ± 1 grams, designed for the precise determination of a material's puncture resistance.
Impact energy up to 90Num, Impact device mass 250g, can measure surface roughness up to 30μm large heavy specimen, ball head using tungsten carbide material Hardness up to 1600HV.
The Gamma ball volume replacement method is used to support 0.01-300 g weight range and 0.001g/cm ³ density accuracy, and the immersion depth of the liquid level can be adjusted arbitrarily and the air buoyancy error can be compensated.
The instrument is designed with a heavy hammer structure, with a weight mass of 6600g +/- 33g, which is suitable for the bending performance test of reflective film. It is simple to operate and safe and reliable to measure, and meets the requirements of national standards.
Impact energy up to 90mJ, can detect materials with a maximum Hardness of 650HB, designed for large and heavy castings, can adapt to workpieces with a surface roughness of 6.3μm, and a minimum test thickness of 10mm.
Core noise reduction technology is used to reduce operating noise. The rotation ratio of planetary disk and ball mill Tank is 1:2 to pRoduce a strong crushing force. The maximum Processing capacity is 6000ml and the discharge fineness is up to 0.1μm. It supports various grinding methods such as dry and wet grinding.
Adopt core noise reduction technology, low vibration and low noise; Rotation speed 850rpm, discharge particle size is less than 0.1um; support dry grinding and wet grinding and other grinding methods, equipped with strong heat dissipation system to ensure stable operation.
