Measurement range 0-40000W/m ², Light spectrum Response 1000-1700nm, can automatically calculate and display infrared barrier rate, photosensitive aperture 10mm, suitable for performance testing of various Infrared sources and thermal insulation materials.
The equipment is designed according to the international coating stain resistance experimental method, the water Tank volume is 5L, the inner diaMeter of the flow pipe is 8mm, and the time control range is 0~ 99h99s. It is suitable for the stain resistance test of building exterior coatings.
Using vanadium oxidation uncooled infrared focal plane Detector, temperature resolution of 0.1 ℃, with 56 ° × 42.2 ° field of view and focus-free design, support center point temperature measurement and cold hot spot automatic tracking function.
Measurement accuracy of (3 + L/200) μm, equipped with high resolution CCD and adjustable LED Illuminant to avoid thermal deformation of the workpiece.
Equipped with Infrared Sensor and Thermal Probe Dual Measurement mode, Response Time is only 1 second, Optical inspection coefficient is 3:1, support -40~ 150 ℃ wide range temperature measurement, to meet the needs of accurate temperature detection in different scenarios.
High Accuracy Time Controller and Solenoid Valve are used to automatically control the flushing time. The water Tank and pipe fittings are made of stainless steel, resistant to corrosion, small in size and light in weight, easy to install and operate, and the time control range is 0-100 hours.
Full marble construction ensures Stability, Measurement accuracy up to (3 + L/200) μm, Adjustable LED Illuminant to avoid thermal deformation of workpiece, Support Z-axis image altimetry or contact measurement.
Full marble construction ensures Stability and rigidity, Measurement accuracy up to (3 + L/200) μm, Adjustable LED Ring Illuminant to avoid thermal deformation of the workpiece, Support manual operation and a variety of accessories options.
Using infrared radiation heating, fine grinding mirror drying surface, heating power 2.0KW, maximum temperature 180 ℃, drying size 600mm × 350mm, to ensure uniform drying and smooth surface.
With 260 * 200 thermal imagery resolution and 70mK thermal Sensitivity, it can quickly locate the abnormal temperature rise point of the circuit board, support -10~ 120 ℃ temperature measurement range, equipped with adjustable lens and multi-directional adjustment bracket, easy to accurately observe the thermal distribution of the circuit board.
Full marble construction ensures Stability, Measurement accuracy up to (3 + L/200) μm, Adjustable LED Illuminant to avoid thermal deformation of workpiece, Support Z-axis image altimetry or probe measurement.
All-marble construction ensures Stability, Measurement accuracy up to (3 + L/200) μm, Adjustable LED Illuminant to avoid thermal deformation of workpiece, Support three-axis friction precision transmission and Z-axis image altimetry function.
Temperature range RT +~ 300 ℃, heating rate 120 ℃/h or 50 ℃/h, maximum deformation Measurement range 1mm, support thermal deformation and Vicat test, real-time display and alarm function.
Stability is ensured by all-marble structure, three-axis friction transmission is sensitive without backlash, Measurement accuracy (3 + L/200) μm, adjustable LED Illuminant avoids thermal deformation of workpiece, and supports Z-axis height measurement or probe measurement.
Adopt automatic potential Titrimetric method, built-in standard method to directly read the results, support silver nitrate (AgNO3) calibration and blank experiment, data management can store 200 sets of results, titration analysis Repeatability of 0.20%.
