The Gamma ball impregnation volume replacement method is used to support 0.01-600 g sample range, density accuracy 0.001g/cm ³, adjustable immersion depth and compensation for air buoyancy error, and is suitable for medium and high viscosity fluid testing.
The pre-pressurization technology is used to ensure the stable exudation of electrolysis liquid in viscous samples, the design of the ceramic core liquid network part effectively prevents blockage, and the membrane Impedance is less than 150MΩ, which is suitable for high temperature and high voltage environment testing.
The Gamma ball volume replacement method is used to support 0.01-300 g weight range and 0.001g/cm ³ density accuracy, and the immersion depth of the liquid level can be adjusted arbitrarily and the air buoyancy error can be compensated.
Pre-pressurization technology is used to prevent clogging of viscous samples, Protelyte oily electrolysis solution avoids protein reaction, ceramic core liquid network design, Temperature range -5~ 100 ℃, Membrane Impedance < 150MΩ.
Pre-pressurization technology is used to prevent clogging of viscous samples, Protelyte oily electrolysis solution avoids protein reaction, three ceramic core liquid network design, Temperature range 0~ 130 ℃, Membrane Impedance < 200MΩ.
The Gamma ball volume replacement method is used for the measurement of medium and high viscosity liquids with an accuracy of 0.001g/cm ³. The immersion depth can be adjusted arbitrarily and the air buoyancy error can be compensated. The test time only takes 10 seconds.
Pre-pressurization technology is used to ensure stable exudation of electrolysis solution in viscous samples, equipped with 3 ceramic core liquid network parts and Protelyte oily electrolysis solution, membrane Impedance < 200MΩ, effectively prevent protein settling blockage, suitable for high temperature and high voltage environment.
Pre-pressurization technology is used to ensure stable exudation of electrolysis in viscous samples, equipped with a three-ceramic core liquid network structure to reduce the risk of clogging, Protelyte oily electrolysis solution avoids reaction with proteins, membrane Impedance is less than 200MΩ, suitable for -5~ 100 ℃ Temperature range.
Heating power 800W, speed range 0-2600 rpm, support vacuum reaction and pressure reaction for a long time stirring, with durable magnetic steel and PTFE stirrer.
Measurement range 0-14pH, temperature 5-60 ℃, equipped with removable protective foot, suitable for viscous sample measurement, fiber single salt bridge design to ensure measurement Stability.
Using pre-pressure technology to ensure stable exudation of electrolysis in viscous samples, equipped with Protelyte oily electrolysis solution to avoid protein reaction, membrane Impedance < 500MΩ, Temperature range 0~ 130 ℃, suitable for high temperature and high voltage environment.
The calibrated value is 470mV, the capacity is 500mL, and the tamper-proof sealing design is adopted to ensure that the standard liquid has a valid period of up to 5 years in the unopened state to ensure the accuracy of calibrating.
DC brushless motor design, Rotation speed 0~ 2000rpm, put in the stirrer without hopper; double-decked thermal insulation structure, rapid heating and prolong the life of the host; built-in over-temperature protection device, safe and reliable use.
Four-blade structure design, blade width 70mm, Rod length 300mm, low-speed operation to pRoduce tangential flow, the edge of the formation of high shear rate, effectively prevent media deposition, suitable for high viscosity fluid mixing.
The minimum detection limit of the adapter is 1cP, the operation temperature range is -40 ° C to 250 ° C, the stainless steel material is easy to clean, and the sample dosage is only 18-20mL, which is suitable for low viscosity fluid analysis.
