Adopting 500 * 700mm Dimensions, used with bar or Film Applicator, is conducive to the smooth and effective film, and improves the convenience of film operation.
The 4-sided coating Applicator can be prepative of four wet film thicknesses, the accuracy is +/- 3μm, the application width is 80mm, the stainless steel material is resistant to corrosion, and the operation is simple only need to change the angle.
The 4-sided coating Applicator can be prepative of four wet film thicknesses, the conversion angle is easy to operate, the accuracy is +/- 3μm, the stainless steel material is resistant to acid and alkali erosion, and the application width is 80mm.
Using magnetic Induction and eddy Current principle simultaneous measurement composite coatings, Measurement range 0~ 1500μm, error +/- 1%, can display a single coating and zinc layer thickness, suitable for the accurate detection of ferrous and non-ferrous substrates.
Using stainless steel material acid and alkali, wet film thickness 50μm accuracy +/- 2μm, suitable for flat and solid substrate coating different pRoducts, surface polishing.
Using magnetic Induction and eddy Current dual principle, it can simultaneously measure paints and zinc layer thickness. Measurement range is 0-1500 μm, accuracy is +/- 1%, suitable for composite coating system inspection.
Spreader width 100mm, wet film thickness 40μm, wear resistant corrosion resistant alloy steel material, can be manually operated or with automatic Film Applicator to ensure coating conformity and Repeatability.
Using high-speed ADC data collection, resolution up to 1μm, can simultaneously measure the thickness of multi-layer coatings or coatings plus substrates, with gain automatic switching and estimated thickness setting function, Measurement range 13~ 1000μm (epoxy resin coating).
With four adjustable friction Frequency 21/43/85/106cpm, friction load 20N, support linear reciprocating friction movement, power-off memory function to ensure that paraMeters are not lost, effective analysis of coating adhesion and wear resistance performance.
Impact energy 3N, Impact device mass 75g, suitable for measurement of small or thin specimens and surface hardening layer, the minimum thickness can be measured 1mm and the minimum hardening layer depth 0.2mm.
Equipped with 254nm and 365nm dual-wavelength ultraviolet light sources, it supports thin-layer analysis and paper-layer analysis, can identify fluorescent substances, and is equipped with a 200 * 50mm filter.
With a capacity of 2.5 liters, it adopts a single-layer structure design and is suitable for a variety of Power Dispersers to ensure efficient and stable material handling and easy operation.
Measurement range 0-12mm, Accuracy of 1-3%, Support automatic identification of matrix material and continuous Measurement mode, suitable for pipeline anticorrosive layer defect location.
Servo motor drive, coating speed 1~ 500mm/S adjustable, film accuracy of +/- 0.002mm, magnetic head fixed and 4-sided Applicator design to improve the convenience of operation and Spreader uniformity.
Using metal layer plate structure, Temperature range -7~ 70 ℃, support 13 point temperature measurement, can simultaneously Spreader 6 samples, through drying air flow and layer temperature to achieve accurate film formation detection.
