The line pressure range is 0.33~ 80N/mm, and the width of the pressing roller is 300mm, which can complete ordinary pressing, high-pressure pressing, smooth pressing and calendering experiments, and support a variety of blanket pressing tests.
Operating Pressure 0-5MPa adjustable, PID intelligent temperature control accuracy +/- 3 ℃, hydraulic system with long-term pressure holding function, press plate Travel 200mm, suitable for hot pressing and hot calendering experiments, to meet the QB/T3703-1999 standard requirements.
Horizontal press measurement combined with a physical positioning observation window, with repeatability accuracy dE*ab ≤ 0.02. It supports 5 measurement apertures and over 30 measurement parameters, and enables color data sharing through a mobile application.
Using metal plating anilox roller, the number of lines can reach 180 lines/inch, which can precisely control the film fineness, and is suitable for the uniform Spreader test of inks Coating glue on various substrates.
Using 160 line metal anilox roller and rubber roller combination, print width 70mm, suitable for inks proofing, wet film thickness and the number of lines inversely proportional, proofing authenticity and easy to operate.
The thermostat is used to control the heat transfer of the heating tube, the temperature accuracy is +/- 2 ℃, and the heating range is adjustable from room temperature to 250 ℃; it is equipped with light curtain protection device and temperature abnormal alarm function, and the operation is safe and reliable; the parallelism of the upper and lower templates is within 0.05 to ensure uniform pressure.
Using 400 wire metal anilox roller to control the ink film thickness, flexographic samples can be quickly prepared, easy to use and clean, and the repRoducibility is very similar to that of conventional flexographic printing.
Three rollers are used to crush each other to destroy the molecular binding force, and the material is crushed and mixed. The size of the roller is 65x135mm, the rotation speed of the middle roller is 88rpm, and the particle size of the starting material is 50~ 100μm.
Using 140 wire metal anilox roller to control ink film thickness, flexographic samples can be quickly prepared, easy to use and clean, and high repRoducibility.
Using 100 wire metal anilox roller to control ink film thickness, it can quickly prepare flexographic samples, easy to operate and clean, and good repRoducibility.
Uniform Spreader with dual roller structure, 160 lines/inch anilox roller precisely controls film fineness, metal plating anilox roller ensures durability and supports multi-material Spreader testing.
Equipped with 140lpi, 180lpi, 200lpi anilox roller and metal engraving roller to control ink film thickness, can quickly pRoduce flexographic samples, easy to use and clean, good repRoducibility.
Using 200LPI anilox roller and 70mm print width, metal anilox roller and rubber roller combination, the handle is made of stainless steel, suitable for a variety of inks Spreader and good sample repRoducibility.
150 line metal anilox roller and 70mm print width, quadrilateral pyramid mesh design to ensure uniform Spreader, proofing intuitive real, suitable for a variety of liquid Coating Spreader.
Adopt horizontal three-roller extrusion grinding, roller clearance hand adjustment, maximum processing viscosity 3000000cps, roller can be cooled down water temperature control, fineness control precision, suitable for a variety of viscosity materials.
