It can measure the surface roughness of the groove with a width of more than 3mm and a groove depth of less than 10mm, and can also measure the plane and cylinder. It can be stably detected with a special measurement platform.
The multi-groove coating scraper can scrape 10 wet-films of different thicknesses at one time, the thickness difference of adjacent films is 25um, and the wide film thickness range of 50-675um is supported. It is convenient to visually observe the sag situation by placing the test plate vertically.
It can measure the groove surface roughness with a groove width greater than 2mm and a groove depth less than 3mm, and supports both flat and cylindrical measurement. It can be accurately detected with a special measurement platform.
Slot-die Spreader and gravure coating dual function design, Spreader thickness range of 0.005-3mm, drying temperature up to 200 ℃, bonding accuracy of 0.5mm, suitable for a variety of non-elastic materials stable composite and Spreader processing.
Slot-die Spreader technology implementation of 0.005-3mm thickness range of precision Spreader, composite roller heating temperature up to 200 ℃ to ensure firm gluing, servo motor control to achieve 0.001-10m/min stepless speed regulation, equipped with 1 Meter drying tunnel to achieve efficient drying curing.
The Tester has a 0.1 to 4.0mm multi-specification groove depth, which can be used with a sag Tester for dedicated testing to help quickly adjust the Coating formula and improve the experimental efficiency.
Using slot-die coating method, application width ≤ 500mm, thickness range 10-250μm; equipped with automatic deviation correction and constant tension system, Oven temperature RT +~ 160 ℃, support segmented thermostatic, ensure Spreader accuracy +/- 3 microns.
Using Slot-die Spreader technology, the thickness range of Spreader is 0.005-3mm, the bonding speed is 1~ 10m/min, and the drying temperature can reach 200 ° C. It is suitable for a variety of non-elastic materials to achieve accurate Spreader and efficient compounding.
Slot-die Spreader technology implementation of 0.005-3mm thickness precision control, composite roller heating temperature up to 200 ℃ to ensure firm gluing, equipped with 1 Meter drying tunnel and stepping motor to achieve 1-10m/min stable operation.
With 5 pairs of grooves designed, the groove depth covers the range of 100 to 1000 μm, which can accurately test the surface Smoothness of paints Dry-Film and reduce unevenness such as brush marks and spray points.
Made of stainless steel, the groove width is 12mm, Graduation 1.5μm, with a single groove design, suitable for fineness measurement in the range of 0-15 microns.
Made of stainless steel, with a slot width of 12mm and Graduation of 2.5μm, the single-channe design is easy to operate and suitable for particle fineness testing.
With 90 ° micro Probe design, Probe measurement port diaMeter is only 5mm, suitable for narrow area measurement; Measurement range 0-625μm, resolution 0.1μm, can obtain more than 60 readings per minute.
Made of stainless steel 303, excellent Abrasion Resistance, wet film thickness 182.9μm, precise control of coating Smoothness through fixed groove design, suitable for a variety of industrial Spreader applications.
The leveling is evaluated by film fringe close test, the groove depth is 250-4000 μm, and the 5 pairs of grooves are designed to facilitate the observation of fringe changes, which is suitable for Dry-Film surface Smoothness detection.
