Adopting a two-stage design, the pumping speed is up to 60L/min, the ultimate pressure is 0.085MPa, and it can operate continuously for 24 hours without oil. The noise is lower than 50dB, and it has the dual function of positive and negative pressure, making it easy to maintain.
Constant pressure ensures uniform sampling, suitable for a variety of powder material testing, implementation of GB9087-88 and other standards, improve sampling accuracy and conformity.
The transparent vacuum chamber is sturdy and durable, and the automatic constant pressure air supply ensures the stability of the preset Vacuum Level. The range of Vacuum Level is 0~ -90KPa, and the test process is automatically completed with one-click operation, without the need for an external vacuum pump.
The equipment operates under vacuum or pressure conditions, with a processing viscosity of 10000MPas, Operating temperature of 170 ° C, equipped with anchor type screw scraping wall stirring slurry and high shear homogeneous Mulser, supporting Multi-ParaMeter measurement such as material temperature and pressure.
Disperse emulsification homogeneous mixing under vacuum or pressure environment, processing viscosity up to 10000MPas, Operating temperature 170 ℃, equipped with a variety of sensing systems Measuring temperature, pressure, viscosity and other paraMeters, observing the reaction process through Glass kettle.
The pumping speed is 60L/min, the ultimate pressure is > 0.085Mpa, the positive and negative pressure is dual-use, the oil-free operation, the noise is lower than 50dB, it can work continuously for 24 hours, and the maintenance is simple.
Manual pressure control pressure holding operation is simple, electronic pressure holding device reduces mechanical abrasion, pressure range 0~ -90kPa, accuracy +/- 0.1kPa, Organic Glass sealing barrel wall thickness 15mm to enhance compressive strength.
The pressure column and ball joint structure are used to ensure that the test surface is close, the pressure column mass is 250g, the bottom surface diaMeter is Φ 50 +/- 1mm, and it is equipped with 100g to 500g weight, which can simulate the contact performance of coatings under different pressure conditions.
Measurement range of pressure -100 to 6000Kpa, temperature range -10-200 ℃, support 83 kinds of refrigerants, suitable for refrigeration system maintenance and fault diagnosis.
The sealing performance of the test system is less than 10% pressure drop within 1 minute, the resolution is up to 0.1kPa, the maximum Breaking strength value is automatically retained and the trend printing detection results are supported.
The pumping rate reaches 2 liters per second, the ultimate pressure is 6 × 10 ^ -2 Pa, the operation is stable and the noise is only 66 decibels, and the temperature rise is controlled within 40 ° C, making it easy to install and use.
DiaMeter 20mm specification, starting pressure 0.7MPa, maximum pulling pressure up to 24MPa, suitable for a variety of drawing Testers, providing stable adhesion detection support.
The pumping speed is up to 30L/min, the ultimate pressure is > 0.085Mpa, and the imported corrosion-resistant rubber diaphragm is adopted. The oil-free design avoids pollution, and the noise is lower than 50dB. It can work continuously and stably for 24 hours.
Using electric pressure system and circular pressing operation mode, printing pressure 0-4mm, speed 0-100 Meters, adjustable scraper pressure and speed, support low accuracy overprinting and Color detection.
Using R2.5mm steel ball to apply 20N pressure, test at standard temperature for 60 minutes and then evaluate the thermal deformation performance of the material through measurement of Crane diaMeter, which is suitable for testing of various electrical components.
