Using 2268 +/- 7g standard brush parts, sanding speed 50cpm, automatic counting function to ensure test Repeatability, linear reciprocating motion simulates actual sanding conditions.
Easy to use magnetic suction Cup loading and unloading, sanding times 0~ 9999 two-way count, friction load 570 +/- 20g, additional weight adjustment load, suitable for undercoating and putty anti-sanding performance test.
With 0~ 135cpm friction speed range and 155mm Test Travel, using two-way counting system, can be configured with additional weight adjustment load, suitable for a variety of sample size sanding resistance test.
Adopt 37 +/- 2cpm friction speed, 300mm sanding Travel, 1000g standard load, automatic counting to set value stop, Repeatability is excellent.
Friction speed 0~ 135cpm, Test Travel 155mm, round-trip count 0~ 9999, suitable for accurate determination of sanding performance of undercoat and putty.
Adopt double grinding head linear friction mode, load 570 +/- 20g adjustable, working plate Rotation speed 0~ 135rpm, magnetic chuck design makes sample loading and unloading convenient, the counter directly reads the number of sanding.
The use of diamond sanding needles can flatten the surface of the grinding wheel, improve the utilization rate of abrasive wheels, and is equipped with a water supply system to support wet grinding and dry grinding. The size of abrasive wheels is about 250 × 30 × 32mm, and the Rotation speed is 1400rpm.
Using diamond sanding needle to smooth the surface of abrasive wheels, abrasive wheels stepless speed range of 500~ 1450rpm, equipped with stainless steel settling filtrate drawer to prevent clogging, wet grinding dry grinding can be applied.
Manual lifting design, Rotor speed 0.1-200/min stepless adjustable, built-in automatic temperature optimization program, up to 8 degrees/min, sample volume 10ml, repRoducibility +/- 1% F.S.
High Accuracy stepper motor, speed range 0-135 times/min, test stroke 155mm, equipped with manual suction Cup and a variety of weights, can be freely set the number of times 0-9999.
Equipment set stirring, sand grinding, dispersing multi-function in one, using dual-axis constant force automatic lifting system, lifting Travel 250mm, speed range 0-2800rpm, with small size, low noise, no carbon brush abrasion characteristics.
Rotation speed 0-3000rpm, fineness of grinding can reach 10um or less, double-decked chill down jacket is used to control temperature rise less than 10 ℃, electric lifting operation is convenient, zirconia bead grinding medium to achieve efficient dispersion and ground synchronization.
Adopting a special rotor-stator structure to achieve stepless speed regulation of 60-2800rpm, high-frequency mechanical shearing is generated in the precision gap, enabling the material to withstand hundreds of thousands of shearing effects.
The high-performance motor is used to run smoothly and with low noise, and the high-speed operation of the dispersion disc generates strong vortices to achieve shear impact between particles. It has a speed regulation range of 0 to 1500rpm and a processing capacity of ≤ 20000cps. It can be equipped with timing fixed speed and explosion-proof configuration.
Electric lifting design to achieve dispersed ground synchronization, maximum Rotation speed 3000rpm, fineness of grinding up to 10um or less, configuration double-decked chill down jacket temperature rise less than 10º, zirconia bead medium to ensure efficient grinding.
