The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
Mixing method of low speed intermittent sticking barrel edge, professional Impeller design, can be thoroughly stirred in 10 minutes without heating up, Speed range 0~ 50rpm adjustable, easy to replace stainless steel Mixing Tank.
The use of low-speed intermittent barrel edge stirring, mixing inks evenly within five minutes without heating up, Speed range 0~ 60rpm, L-type paddle stirring design is clean and simple, direct transmission to reduce power loss.
The uniform glue speed is adjustable from 100 to 7000rpm, and the time is adjusted steplessly in multiple stages. The solenoid valve control gas path is suitable for the assembly line process. The motor torque is large and the operation is smooth. Vacuum chuck ensures the stability of the substrate.
The application width can be adjusted freely, and the drawdown blade Coater can be adapted to meet different experimental testing needs and realize flexible film operation.
Using scraping method to achieve 0.005-3mm wet film thickness, Spreader accuracy of +/- 5%, equipped with hot air circulation Oven and automatic constant tension control to ensure Spreader uniformity and Stability.
Spreader thickness range 0.001-10mm adjustable, bar accuracy +/- 0.001mm, support 5-200mm/s stepless speed, through mechanical fixing and stable pressure to ensure film uniformity, improve experimental repRoducibility.
The uniform glue time can be adjusted from 0 to 240 seconds, the speed range is 100-7000rpm, the four-stage speed controller ensures the uniformity of the coating, the solenoid valve control gas path is suitable for the assembly line process, and the motor torque is large and the operation is smooth.
Spreader thickness range 0.01~ 10mm, coating speed 5~ 180mm/s, using removable drawdown blade and import bar to ensure Spreader uniformity and High Accuracy control, improve experimental repRoducibility.
Driven by brushless DC motor, Speed range 60~ 1500rpm, Acceleration 1~ 250rpm/s. Supports forward and reverse alternating and intermittent stirring, programmed control ensures mixing uniformity and Repeatability.
Driven by brushless DC motor, Speed range 60-1500rpm, Acceleration 1-250rpm/s. Supports forward and reverse cycle and intermittent mode, program paraMeters can be stored for a long time, Operating interface is intuitive.
With 3000 times/min and 6000 times/min two vibration frequencies, the amplitude can be continuously adjusted between 0mm and 3mm, supporting three modes of subtle vibration, intermittent vibration and continuous vibration, suitable for ≤ 325 mesh material analysis.
Temperature control accuracy of 0.5 ℃, pump Flow rate ≥ 4L/min, ensure uniform and stable water temperature, compact and durable structure, suitable for a variety of experimental environments.
Support 100-5000 rpm safe speed limit and 0.1 second time resolution, equipped with 12 sets of programs and automatic speed correction function, compact structure only 14KG, with vacuum interface compatible with a variety of experimental requirements.
Spreader rate 5~ 180mm/s adjustable, heating temperature up to 200 ℃, equipped with vacuum adsorption system to ensure Spreader flat, reciprocating lame plating to achieve uniform film, improve experimental repRoducibility.
