Heavy-duty stainless steel structure ensures stable support, equipped with 3 strong magnets for firm adsorption, maintaining the vertical state of Microscope, suitable for various metal surface fixing needs.
Provides 40x magnification and a 0.60 numerical aperture to ensure high resolution and long working distances for a variety of Microscope applications.
Made of aluminum, Dimension 150 * 220 * 290mm, support 360 ° swirl/spin adjustment and arm adjustable, suitable for a variety of Microscope models.
Ceramic fiber Furnace to achieve multi-faceted heating, Temperature uniformity less than +/- 5 ℃, heating rate ≥ 10 ℃/min, with nitrogen filling device to slow down oxidation and flue discharge of harmful gases.
Adopting frequency conversion stirring technology, the impeller Rotation speed can be adjusted from 1000-3600rpm, and supports two test modes of counting and not counting to ensure that the fiber retains its original structural properties during the wet dissociation process.
Pottery and porcelain fiber Furnace and multi-faceted heating technology, Temperature Fluctuation +/- 2 ℃, energy saving rate of 40%, with 30 program settings and over-temperature protection function.
Using electronic technology and LCD screen, impeller rotation frequency 49 +/- 1.5S-1, motor power 370W, wet dissociation pulp to maintain the original fiber structure, easy to operate.
Support capillary tubing and hot stage two measurement methods, temperature range RT +~ 320 ℃, Microscope 40 times magnification observation, sexual repeability +/- 1 ℃ (≤ 200 ℃), to meet the melting point of crystalline organic compounds determination needs.
The samples were treated by acid-base cooking method, and 6 samples could be measured each time. The repeatability error of the absolute value of crude fiber content below 10% did not exceed 0.4%, and the determination time was about 100 minutes.
Ceramic fiber material, Temperature range, Temperature Fluctuation +/- 0.5 ℃, support multi-stage programmable control, independent temperature limit alarm system to ensure safe operation.
Pottery and porcelain fiber Furnace to achieve multi-faceted heating, temperature uniformity +/- 2 ℃, heating rate 1-30 ℃/min adjustable, with 30 programming and double over-temperature protection function.
Microscope observation mode, support capillary method and hot table method, temperature range RT +~ 320 ℃, resolution 0.1 ℃, repeability +/- 1 ℃ (≤ 200 ℃), Draft Shield design to reduce environmental impact.
Pottery and porcelain fiber Furnace and multi-faceted heating technology, temperature uniformity +/- 2 ℃, heating rate 1-30 ℃/min adjustable, with 30 programming and over-temperature protection function, energy saving rate of 40%.
Pottery and porcelain fiber Furnace and multi-sided heating technology, temperature uniformity +/- 2 ℃, heating rate 1-30 ℃/min adjustable, with 30 program programming and over-temperature protection function, significant energy saving.
Using binocular stereo Microscope observation, support capillary method and hot table method two measurement methods, temperature resolution of 0.1 ℃, repeability +/- 1 ℃ (≤ 200 ℃), with Draft Shield to reduce environmental impact.
