Equipped with 45μm sieve and 70rpm Rotation speed, it is suitable for powders or particles dispersed in water, providing stable screening performance and easy and reliable operation.
Vibration frequency up to 6000 times/min, amplitude 0-3mm continuous adjustment, support subtle, intermittent and continuous three vibration modes, reduce operating intensity and improve efficiency.
With 3000 times/min and 6000 times/min two vibration frequencies, the amplitude can be continuously adjusted between 0mm and 3mm, supporting three modes of subtle vibration, intermittent vibration and continuous vibration, suitable for ≤ 325 mesh material analysis.
Four removable baffles are used to break the powder drop, equipped with 1.18mm aperture sieve and 25mL +/- 0.05mL glassgraduates with scale, and the measurement Stability is guaranteed by the vibration-free base, which is suitable for the accurate determination of loose density.
Measurement range 0001-1.9999 g/cm ³, resolution 0.0001g/cm ³, automatic temperature control 20 +/- 0.1 ℃, with automatic sampling and residue removal technology to ensure High Accuracy measurement.
Frequency 159.2Hz, Acceleration output 14.14m/s ², Maximum load 150g, compact and portable, fast heating, low lateral output, suitable for rapid vibration detection system.
Pulse mode to achieve high intensity mixing, 500~ 2500rpm wide Speed range with 4mm vibration range, DC brushless motor to ensure accurate and stable speed operation.
The steel structure is resistant to corrosion, the baffle discharges harmful gases in sections, the operating surface wind speed is 0.5m/s to ensure no residue, and the Glass window can be adjusted up and down to provide a safe experimental environment.
Demoulding frame design reduces paints residue, 4mm suspension hole supports non-marking vertical horizontal fixing, protective film anti-scratch and anti-corrosion, in line with many international standards.
Fast heating with halogen lamps and High Accuracy Sensors ensure accurate measurement. The cast aluminum housing is rugged, the multi-layer stainless steel heating chamber is uniform and efficient, and the temperature and time can be flexibly set.
Frequency 159.2Hz, Acceleration output 10m/s ², Support 150g load verification, Transverse output less than 5%, Heating time less than 3 seconds, Compact handheld design for fast detection.
Using 1.2mm all stainless steel stamping, working face wind speed 0.25-0 38m/s, air volume 1100-1800m ³/h, equipped with baffle segmented discharge of harmful gases, the window can be arbitrarily positioned.
Cylinder volume 40L with 1020rpm dispersion shaft Rotation speed, can achieve continuous and efficient grinding dispersion, sieve discharge design is easy to change color cleaning operation
Cylinder volume 80L with 830rpm dispersion shaft Rotation speed, to achieve efficient ground dispersion; sieve discharge design for easy cleaning and color change, to adapt to different material process requirements.
The static capacity method is used to test the principle, the aperture analytical range is 3.5 to 5000 angstroms, and it is equipped with a modular stainless steel vacuum gas circuit and a metal dewar bottle, which supports DFT and MC theoretical model calculations.
