CATEGORIES

    Rubber Surface Tension Meter

    Overview Products Knowledge Standards Terms
    The rubber surface Tensiometer calculates the surface tension value by measuring the contact angle of a liquid on the rubber surface. It is used to evaluate the wettability and bonding effectiveness of rubber materials, as well as to control quality in adhesive coating and composite processes.
    Selection
    When selecting, consider the compatibility of the rubber sample size with the instrument's measurement range, ensure the contact angle measurement accuracy meets process requirements, and check if the instrument is suitable for high-viscosity test liquids. The operating interface should be user-friendly, and maintenance parts must be readily available.
    Measurement method
    Measurement mode
    Monitoring requirements
    Instrument style

    Terms

    Dyne Pens for Printing
    Dyne pen
    Paper Tension Meter
    Surface Tensiometer
    Laboratory Ozone Aging Test Chamber
    Dyne pen
    Pendulum Damping Hardness Tester
    Surface Energy Dyne Pen
    Ozone Aging Chamber
    High Voltage Pinhole Detector

    Standards

    Active GB/T 20026-2005
    Rubber and plastics hose -- Determination of abrasion of lining
    Active GB/T 9867-2008
    Rubber, vulcanized or thermoplastic-Determination of abrasion resistance using a rotating cylindrical drum device
    Active GB/T 19089-2012
    Rubber-or plastics-coated fabrics - Determination of abrasion resistance - Martindale method
    Active GB/T 1689-2014
    Rubber vulcanized―Determination of abrasion resistance (Akron machine)
    Active GB/T 30314-2021
    Rubber- or plastics-coated fabrics—Determination of abrasion resistance—Taber abrader
    Active GB/T 17782-1999
    Rubber，vulcanized--Test method of aging by heat and air pressure
    Active GB/T 1695-2005
    Rubber,vulcanized -- Determination of electrical breakdown strength and voltage resistant at commercial power frequency
    Active GB/T 12829-2006
    Rubber, vulcanized or thermoplastic - Determination of tear strength of small test pieces (Delft test pieces)
    Active GB/T 12832-2008
    Rubber-Determination of crystallization effects by hardness measurements
    Active GB/T 1692-2008
    Vulcanized rubber-Determination of the insulation resistivity
    Active GB/T 2411-2008
    Plastics and ebonite - Determination of indentation hardness by means of a duronmeter(shore hardness)
    Active GB/T 1687.4-2021
    Rubber,vulcanized—Determination of temperature rise and resistance to fatigue in flexometer testing—Part 4: Constant-stress flexometer
    Active GB/T 41931-2022
    Plastics/rubber—Polymer dispersions and synthetic rubber latices—Freeze-thaw cycle stability test
    Active GB/T 46230-2025
    Solution-polymerized SBR—Evaluation methods of viscoelastic properties
    Active GB/T 39693.4-2025
    Rubber, vulcanized or thermoplastic—Determination of hardness—Part 4: Indentation hardness by durometer method (Shore hardness)

    Instruments

    CUIYUAN 49 Dyne pen Corona pen surface tension test pen
    CUIYUAN 49 Dyne pen Corona pen surface tension test pen

    It can accurately test the surface tension value of the material, support a variety of specifications bottle selection, the test range covers 30-60 dynes, suitable for Plastic film, metal foil and other materials surface tension detection.

    $ 87.00
    CUIYUAN 56 Dyne pen Corona pen surface tension test pen
    CUIYUAN 56 Dyne pen Corona pen surface tension test pen

    Can accurately test the material surface tension, support custom ink Color and tip shape, the test range covers 30-56mN/m, effectively control the pRoduction process mass.

    $ 87.00
    CUIYUAN 61 Dyne pen surface tension test pen corona pen custom ink
    CUIYUAN 61 Dyne pen surface tension test pen corona pen custom ink

    Color and shape of ink tip can be customized to accurately test the surface tension of materials, suitable for a variety of printing processes and Plastic film materials, effectively control pRoduct mass.

    $ 87.00
    CUIYUAN 24 Dyne pen Corona pen surface tension test pen
    CUIYUAN 24 Dyne pen Corona pen surface tension test pen

    It can accurately test the surface tension of materials, support a variety of specifications bottling and Color customization, suitable for Plastic film, conductive materials and Glass Pottery and porcelain and other materials surface tension detection.

    $ 87.00
    CUIYUAN 36 Dyne pen surface tension test pen corona pen custom ink
    CUIYUAN 36 Dyne pen surface tension test pen corona pen custom ink

    Customizable ink Color and tip shape, available in a variety of specifications from 10ml to 500ml, can accurately test the surface tension of the material, suitable for a variety of printing and compounding processes.

    $ 87.00
    CUIYUAN 51 Dyne pen surface tension test pen corona pen
    CUIYUAN 51 Dyne pen surface tension test pen corona pen

    It can accurately test the surface tension value of the material, suitable for a variety of printing composite processes, the test range covers Plastic film, metal foil, etc., providing a variety of specifications from 10ml to 500ml.

    $ 87.00
    FENGZHIYUE 54 Dyne pen surface tension test pen Plastic film Metal Pottery and porcelain test
    FENGZHIYUE 54 Dyne pen surface tension test pen Plastic film Metal Pottery and porcelain test

    It can test a variety of material surface tension, provide a variety of Rod numbers of 28-56, and the uniform test of the water outlet is accurate, effectively avoiding pRoduction delays caused by unqualified materials.

    $ 86.00
    FENGZHIYUE 56 Dyne pen surface tension test pen Plastic film Metal Pottery and porcelain test
    FENGZHIYUE 56 Dyne pen surface tension test pen Plastic film Metal Pottery and porcelain test

    It can test the surface tension value of No. 28-56, and the effluent is uniform and stable. It is suitable for surface tension detection of various materials, and effectively controls the process mass to avoid delays.

    $ 86.00
    CUIYUAN 48 Dyne pen surface tension test pen red
    CUIYUAN 48 Dyne pen surface tension test pen red

    Accurately test material surface tension, support custom ink Color and tip shape, suitable for a variety of printing processes and material testing needs.

    $ 87.00
    FENGZHIYUE 36 Dyne pen surface tension test pen orange
    FENGZHIYUE 36 Dyne pen surface tension test pen orange

    The effluent is uniform and the test is accurate, and the surface tension can be measured up to 36 dynes, which is suitable for quality control of various materials and reduces pRoduction delays.

    $ 86.00
    CUIYUAN 46 Dyne pen Corona pen surface tension test pen Custom ink Color tip shape
    CUIYUAN 46 Dyne pen Corona pen surface tension test pen Custom ink Color tip shape

    Can accurately test the material surface tension, support 30-60 dyne range, can effectively control the printing composite mass, reduce the loss caused by material failure.

    $ 87.00
    FENGZHIYUE 30 Dyne pen surface tension test pen Plastic film Cermet material detection
    FENGZHIYUE 30 Dyne pen surface tension test pen Plastic film Cermet material detection

    It can test the surface tension value of No. 28-56, the uniform test of the water outlet is accurate, the material mass is effectively controlled to reduce the tool delay, and it is suitable for a variety of material surface tension detection.

    $ 86.00
    CUIYUAN 55 Dyne pen Corona pen surface tension test pen
    CUIYUAN 55 Dyne pen Corona pen surface tension test pen

    Color and tip shape can be customized to accurately test the surface tension of the material, suitable for a variety of printing processes and Plastic film materials.

    $ 87.00
    CUIYUAN 23 Dyne pen surface tension test pen corona pen custom ink Color tip shape
    CUIYUAN 23 Dyne pen surface tension test pen corona pen custom ink Color tip shape

    Color and tip shape can be customized, providing 10ml to 500ml of various bottle specifications, can accurately test the material surface tension, suitable for a variety of printing processes.

    $ 87.00
    CUIYUAN 47 Dyne pen Corona pen surface tension test pen
    CUIYUAN 47 Dyne pen Corona pen surface tension test pen

    It can accurately test the surface tension of materials, support a variety of specifications bottling and Color customization, suitable for Plastic film, conductive materials and other substrates surface preparation quality control.

    $ 87.00

    Articles

    The Application of Contact Angle Measurement Instruments in the Study of the Relationship Between Ink Printing Wettability and Substrate Surface Tension
    This article introduces how a contact angle measuring instrument is used to study the relationship between wettability and substrate surface tension in ink printing. It first explains the principle, assessing the degree of wettability through the size of the contact angle, where an angle less than 90 degrees indicates good wettability.
    Ozone Aging Test Chamber Evaluates Rubber SAE J2527 Cracking
    This article introduces how to use an ozone aging test chamber to evaluate the cracking problem of rubber caused by ozone when used outdoors.
    Rotating Rubber Wheel Abrasion Tester for Determination of Coating Taber Abrasion Index
    This article introduces the method for determining the Taber abrasion resistance index of coatings using a rotating rubber wheel abrasion tester.
    Shore hardness tester measures the hardness of rubber sealing rings.
    This article introduces the method of measuring the hardness of rubber sealing rings using a Shore durometer. The Shore durometer presses a needle into the rubber surface under spring force and converts the indentation depth into a hardness value, commonly using the A scale.
    Rubber non-rotor vulcanization tester measures vulcanization curve.
    The rubber non-rotor vulcanization tester is used to measure the curve of torque versus time during the vulcanization process, in order to assess the crosslinking degree and vulcanization characteristics of rubber.
    Rubber abrasion tester measures tire wear resistance.
    The rubber abrasion tester evaluates wear resistance by simulating the friction between tires and road surfaces. It uses a grinding wheel to rub against rubber specimens under set conditions, measuring mass loss and converting it to volume loss to assess material performance.
    Atomic Absorption Spectrometer for Measuring Heavy Metal Content in Rubber
    This article introduces a method for determining the heavy metal content in rubber using atomic absorption spectrometry. It first explains that rubber may contain harmful elements such as lead and cadmium, which require accurate measurement.
    Quantitative Measurement of Carbon Black Content in Rubber by Thermogravimetric Analyzer
    Thermogravimetric analyzers measure changes in sample mass through programmed temperature control, enabling the quantitative determination of carbon black content in rubber. During the experiment, the rubber is first heated in an inert atmosphere to decompose it, leaving the carbon black intact. The atmosphere is then switched to an oxidizing environment to oxidize the carbon black. The carbon black content is calculated based on the mass loss.
    Ozone Aging Test Chamber Evaluates Crack Resistance of Rubber
    This article introduces how an ozone aging test chamber is used to evaluate the crack resistance of rubber. Ozone is a common factor that causes rubber aging. The test chamber simulates an ozone-containing environment, applies strain to rubber samples, and accelerates their aging process.
    UV Aging Test Machine Evaluates Outdoor Lifespan of Rubber
    This article introduces how ultraviolet aging test chambers assess the service life of rubber in outdoor environments. Rubber exposed outdoors is affected by factors such as sunlight, temperature, and humidity, leading to a gradual decline in its performance.
    Colorimeter controls batch color difference in plastic and rubber films.
    This article primarily discusses how to use a colorimeter to control color differences in the production of plastic and rubber films. It explains the working principle of the colorimeter, which involves converting colors into numerical values represented by L, a, and b values, and then calculating the color difference.
    Insulation resistance tester measures rubber sealing gaskets.
    This article introduces the method of using an insulation resistance tester to inspect rubber sealing gaskets.
    Universal material testing machine measures the tensile modulus of rubber.
    This article introduces how to measure the tensile modulus of rubber using a universal material testing machine. The tensile modulus is an important parameter that measures the ability of rubber to resist stretching under small deformations.
    Selection of Wear Testing Machine: Types of Abrasion Wheels and Load Setting Methods
    The test results of the wear testing machine primarily depend on the type of grinding wheel and the load setting. Grinding wheels include rubber wheels, abrasive wheels, wire wheels, and fiber wheels, among others. The selection should be matched based on the material characteristics and the actual wear scenario.
    The coating machine applies planar optical waveguide cladding material to the surface of optical fibers.
    This article introduces the technique of using a coating machine to apply planar optical waveguide cladding materials onto the surface of optical fibers. It analyzes the characteristics of the cladding materials, such as viscosity and surface tension, and their impact on coating quality.