Support accurate deformation of 0.01mm stride, maximum depression force 35KN, with intelligent lighting interface and adjustable LED Illuminant, suitable for steel and aluminum panel testing to ensure high contrast ratio visibility.
Using positive pressure test principle, Measurement range 0~ 1.6MPa, fully automatic operation, support three test modes, built-in calibrating program, suitable for quantitative measurement of various sealing performance indicators.
The fully automatic electronically controlled hydraulic pump provides smooth and continuous pulling force with +/- 1% accuracy, built-in rechargeable battery supports 200 tests, and IP65 Protection Rating ensures durability.
High Accuracy Position Sensor, indentation accuracy of 0.01mm, the maximum can be measured 1.25mm thick plate, automatic zero after the test without cumulative error, with 10 times magnifying glass for easy observation.
Using large torque stepper motor to achieve automatic reset to zero, indentation accuracy of 0.01mm, support 0.1-0 mm/s adjustable speed, through the indentation depth to determine the minimum depth of coating cracking or disengagement.
Pneumatic fixture to achieve automatic clamping, no manual operation; Measurement range covers 10~ 16000mN, support a variety of sheet material Tear strength detection, equipped with 3.2 inch LCD display and thermal printer.
Side rocker lift design to ensure smooth operation, the lifting process can be retracted and continue; with 0.01mm height display indexing, accuracy of 0.05mm, no need for each boot zero, no conductive requirements for the test plate.
Punch diaMeter 20mm, indentation accuracy +/- 0.05mm, maximum depth 10mm, can measure the minimum depth of cracking or from the substrate of the coating, support single and double top coating test, equipped with digital display resolution 0.01mm.
Fully enclosed metal Furnace body to enhance Baseline Stability, with imported alloy Sensor to enhance corrosion resistance; Temperature range covering room temperature to 600 ℃, support 0.1~ 100 ℃/min program temperature control, with 0.001 ℃ resolution and Automatic calibration function.
Featuring a Cotex-M4 ARM processor, it employs pneumatic sample clamping and an integrated weighing mechanism to achieve fully automated measurement. The oscillation frequency is adjustable from 50 to 200 times per minute, with a weighing resolution of up to 0.001g.
The punch is pushed to the test plate at a constant speed of 0.2 +/-0.1mm/s, and the thickness range of the test plate is 0.30-1. 25mm, which can detect the degree of coating cracking and is suitable for testing of various materials.
Using 7-inch true color Touchscreen and 32-bit microprocessor, Temperature range RT +~ 400 ℃, with automatic atmospheric pressure compensation and over-temperature protection function, the test process is fully automated.
Adopt a new generation of High Accuracy Sensor to ensure stable and reliable weighing, with a reaction time of less than 2 seconds, a fully automatic internal calibration function triggered by time and temperature, and support for a variety of weighing units.
The indentation speed is adjustable 0.01-0 mm/s, the maximum indentation force is 5000N, equipped with emergency button and color touch screen, safe and convenient operation, suitable for a variety of material testing.
Sinking diaMeter 20mm, maximum depth 10mm, with automatic and manual zeroing function, can be single and double top coating laminate test, sinking accuracy up to +/- 0.05mm, resolution 0.01mm.
