4 groups of samples can be tested at the same time, using PID precise temperature control technology, Temperature range from room temperature to 1000 ℃, with automatic calculation of carbon black content and ash content function, open lid structure heat dissipation effect is better.
4 groups of samples can be tested at the same time, using PID temperature control accuracy of 0.1 ℃, support segmented program heating, one key automatic calculation of carbon black and ash content, open the lid structure heat dissipation fast.
The thermal weight loss method is used to measure carbon black content, the operating temperature can reach 990 ° C, and the 7-inch Touchscreen is equipped to realize one-button calculation, support segmented paraMeter setting, and the Furnace body separation design has better heat dissipation.
Using high temperature pyrolysis technology, operating temperature up to 1150 ℃, can test 4 samples at a time, equipped with 7-inch Touchscreen and automatic calculation function, to achieve accurate temperature control and convenient operation.
With manual and automatic temperature compensation function, concentration Measurement range 1 × 10 ^ ²~ 5 × 10 ^ mol/L, the fastest reaction time is less than 4 minutes, support pFe value and iron Ion concentration display.
Laminating-free black and white half design, size 98 * 152mm, Encasement specification 100 sheets/bag, suitable for Coating inks film hiding power performance detection experiment.
Black part reflectance less than 1, white part reflectance 80 +/- 2, Laminating design enhanced anti-Curl ability, suitable for spreading rate testing, area of 0.1 square Meters.
Low-frequency signal penetration depth of 20mm, can simultaneously measure concrete carbide moisture content and plaster moisture content, built-in environment Sensor, support a variety of professional probe expansion measurement function.
Made of non-fluorescent paper, does not contain Fluorescent Whitening Agent, the black part reflectance is less than 1, the white part reflectance is 80 +/- 2, the surface is smooth and anti-Curl, and the test area is 0.1 square Meters.
Sharp probe measurement without leaving marks, measurement range 6%~ 90%, support wood moisture content and wood humidity equivalent value display, equipped with extended Probe and hammer ElectRode for different depth measurement.
Black part reflectance less than 1, white part reflectance 80 +/- 2, no Laminating design to enhance paint wettability, avoid checking or cissing, suitable for specific spreading rate brushing tests.
Measurement unit with Baume degree, sugar content accuracy +/- 0.1 ° Baumé, automatic temperature compensation, 1.5 seconds fast display results, only 2 drops of sample, waterproof design for a variety of environments.
Using computer technology to ensure accurate measurement, the measurement range is 0~ 50%, the resolution is 0.1%, and the moisture content and Ambient Temperature can be measured at the same time.
The fat content was determined by Soxhlet extraction principle, the measurement range was 0.5% -60%, and two samples could be processed at the same time.
Using 140 * 250mm black and white half design, no Laminating surface to ensure detection accuracy, suitable for hiding power performance testing, Encasement specification of 100 sheets/pack for experimental use.
