With tracking pointer and peak pointer double pointer design, pressing needle Travel 0-2.5 mm, Measurement range 10-90Hc, suitable for material testing with pressure above 0.049MPa when the compression rate is 50%, and can be matched with test bracket to improve Stability.
Double pointer design for easy reading, Pin Travel 0~ 2.5mm, Measurement range 0~ 100HD, error +/- 1HD, lightweight and portable only 0.16kg, suitable for on-site Hardness detection.
Pin Travel 0~ 2.5mm, Measurement range 0~ 100HA, Error +/- 1HA, Dual pointer design can display real-time and peak Hardness value at the same time, easy to use handheld or rack.
Suitable for low and medium Hardness material measurement, pressure needle end pressure 0.55N-8.06N, pressure needle stroke 0-2.5 mm, can be matched with test rack to reduce manual operation error, improve test accuracy and Repeatability.
Adopt double-pointer design, pressure needle Travel 0~ 2.5mm, measurement error +/- 1HAO, can be handheld or used with the bench, suitable for stable and fast detection of low Hardness rubber materials.
New material pressure needle Hardness long life, high strength pointer is not easy to deform, forging handle wear and pollution resistance, range 0-20HW accuracy 0.5HW, can be quickly tested on site and support multi Hardness value conversion.
Dual pointer design can display the current value and peak value at the same time, the pressure at the end of the crimp is 445mN, and the measurement error is +/- 1HD, which is suitable for plastic sample condition adjustment testing.
New material pressure needle Hardness high life, high strength pointer is not easy to deform, forging handle wear and pollution resistance, full point and correction point stability, accuracy 0.5HW, suitable for 0.6-6 mm thickness material.
New material pressure needle Hardness high life, high strength pointer is not easy to deform, forging handle wear and pollution resistance, full point and correction point stability, accuracy 0.5HW, suitable for 0.6-13 mm thickness samples.
The minimum sample inner diaMeter is 10mm, the maximum sample thickness is 6mm, the crimping needle is made of imported special steel material, which has high Hardness and long life, and the pointer assembly has high strength and is not easy to deform.
Double pointer design can be used with rack or hand, pressing needle Travel 0-2.5 mm, measurement error +/- 1HA, suitable for rubber and plastic hardness testing.
New material pressure needle Hardness long life, high strength pointer is not easy to deform, forging handle wear and pollution resistance, full point and correction point stability, accuracy of 0.5HW, weight only 625g portable and easy to use.
The imported central guide Rod material has high accuracy and abrasion resistance, the shell is made of super hard aluminum material to resist on-site damage, and the external spring coil pointer slider structure is easy to adjust the friction force. The nominal kinetic energy is 2.207J, and the strength measurement range is 20-60Mpa.
Double pointer design with peak holding and continuous load indication function, external tolerance indicator to facilitate force value judgment, Maximum Measured value 10KN, suitable for electromagnetic interference occasions.
It can measure the minimum inner diaMeter of 6mm aluminum tube and 8mm thickness profile, Indication Error 0.5HW, using high strength pointer and special steel pressure needle, support Hardness value multi-standard conversion.
