Inlet and outlet devices are used to intRoduce inert gas to effectively prevent oxidation and decarburization of high-temperature heating workpieces. The Furnace volume is 16L and the maximum temperature is 1200 ° C. The high-temperature spraying process of the shell is durable.
Operating temperature up to 1100 ℃, Furnace size Φ 60 × 1000mm, using Air-Cooled system to ensure stable operation of the equipment, suitable for material sintering in an inert gas environment.
Maximum temperature 1000 ℃, temperature control accuracy 1 ℃, using high aluminum liner and upper and lower left and right 4-sided heating design, with 30 program settings and over-temperature protection function, uniform temperature in the Furnace.
The maximum temperature is 1000 ℃, the Furnace volume is 30L, the 30-segment programmable controller is used to realize automatic operation, the Furnace door sealing is good to ensure Temperature uniformity, the refractory brick Furnace and the resistance wire heating element are resistant to high temperature and have a long life.
High aluminum Furnace wear-resistant high temperature, 4-sided heating evenly; PID self-tuning temperature control accuracy +/- 2 ℃, over-temperature automatic protection; compact overall structure, convenient and safe operation.
The maximum temperature is 1200 ℃, the Furnace volume is 2L, the microcomputer PID controller is used for precise temperature control, the door sealing design enhances Temperature uniformity, and the corrosion resistance refractory brick Furnace is durable.
With 30 programmable control function, support heating or stay setting, stainless steel Furnace door and microcomputer PID controller, to ensure accurate and reliable temperature control, Furnace Temperature uniformity.
Maximum temperature up to 1200 ℃, temperature control accuracy 1 ℃, with 30 program settings and over-temperature protection function, full range programmable automatic control of heating thermostatic, Furnace size 400 * 250 * 160mm.
The digital display temperature control is accurate and reliable, the hot air circulation system is composed of a high temperature fan and a suitable air duct to improve the Temperature uniformity in the working room, and the heating wire is installed at the bottom to heat up quickly.
Double shell structure and cold air system, temperature control accuracy +/- 1 ℃, maximum temperature 1400 ℃, support a variety of atmosphere environment, rapid cooling, suitable for high temperature experiments.
Maximum temperature of 1700 ℃, Furnace volume of 12 liters, using silicon molybdenum Rod heating and aluminum oxide fiber Furnace to ensure uniform heating and durability, support inert or reducing gas environment, suitable for high temperature material processing.
Using ceramic fiber Furnace and air insulation structure, the surface temperature is only about 50 ℃. Heating to 1200 ℃ for less than 25 minutes, temperature control accuracy +/- 1 ℃, support multi-step program control.
The double-decked Furnace shell insulation design is adopted, and the shell is not hot; the Furnace temperature distribution uniformity is less than +/- 5 ° C, and the heating rate is ≥ 10 ° C/min; it has a nitrogen filling device to slow down oxidation and supports flexible setting of self-made temperature control programs.
It only takes 25 minutes to heat up to 1200 ° C, the temperature control accuracy is +/- 1 ° C, the ceramic fiber Furnace and air insulation structure are used, the surface temperature is only about 50 ° C, and it has multi-step programming function.
Using double-decked shell structure and aluminum oxide Furnace material, temperature control accuracy +/- 1 ℃, heating rate ≤ 20 ℃/min, temperature field Balance and energy saving, low surface temperature.
