Friction speed 0~ 135cpm, Test Travel 155mm, round-trip count 0~ 9999, suitable for accurate determination of sanding performance of undercoat and putty.
Adopting stepless speed regulation technology, the friction speed range is 0~ 135cpm, the test Travel 155mm, the number of times can be set and automatically counted to evaluate the sanding performance of undercoated putty.
The equipment can detect the crazing or peeling of the putty film after bending, equipped with R25 and R50 support film specifications, shaft Rod size is 50mm and 100mm in diaMeter, suitable for 0.2-0. 3mm thick tinplate plate.
The motor-driven edge rises at a rate of 3mm/min to generate and control crazing expansion, which can detect the crazing ability of putty against substrates, with a maximum lift of 20mm, suitable for standard frame 200 × 150mm test plates.
Measurement accuracy 0.02mm, can control the slow expansion of crazing, test putty layer anti-substrate crazing ability.
Easy to use magnetic suction Cup loading and unloading, sanding times 0~ 9999 two-way count, friction load 570 +/- 20g, additional weight adjustment load, suitable for undercoating and putty anti-sanding performance test.
The bending diaMeter of putty film cracking peeling is tested by bending test plate, and the shaft Rod size is 50mm and 100mm. It is suitable for 0.2-0 mm thick tinplate substrate, and the operation is simple and reliable.
Equipped with two kinds of shaft Rods with diaMeters of 100mm and 50mm, it can simulate the actual stress conditions, and make the sample uniform bending and deformation through the rolling shaft, which is convenient for observing the phenomenon of film crazing and peeling.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
Using a 29.7 × 29mm pump and a 2 kg load weight, the material consistency was accurately determined by the spread diffusion diaMeter of the Basis Weight specimen on the Glass platen, meeting the standard test requirements.
Equipped with R25 and R50 two kinds of support film specifications, support 0.2-0 mm tinplate test plate substrate, through the rolling shaft uniform bending deformation, easy to observe the physical changes of the film.
Equipped with 0.5/0 7/1.0 mm three thickness die frame, using baseplate fixed structure to ensure film uniformity, metal drawdown blade design to meet long-term use needs.
The device can quickly mix ground dispersed materials in a closed system, with a speed range of 1500-3500 rpm, a mixing capacity of 5-150G, and features bubble-free and quiet operation.
The non-contact mixing method is adopted to avoid sample contamination, the speed range is adjustable from 0 to 2800rpm, and various containers such as testtube beakers are supported. The mixing efficiency is dozens of times higher than that of manual mixing, and the mixing is uniform.
