It can simultaneously measure more than 10 physical paraMeters such as angle of repose and tap density. The vibration frequency is 300 rpm, and the repeatability error is ≤ 3%. It supports a variety of national standard test methods to meet the needs of comprehensive characteristic analysis of powder.
Adopt swirl/spin vibration mode, vibration frequency 250 +/- 15 rpm, vibration amplitude 3 +/- 0.1mm, built-in micro printer supports fast output results, with stable embedded system and network connection ability.
Adopt swirl/spin vibration mode, frequency 250 rpm, vibration amplitude 3mm, support remote control and embedded system, ensure test Stability and high repeability accuracy.
Double station design, vibration frequency 250 rpm, swirl/spin vibration mode, amplitude 3mm; built-in micro printer, support automatic reading of electronic scale mass, repeatability error ≤ 1%, with stable embedded system.
Adopt three-station design, vibration frequency 250 rpm, vibration amplitude 3mm, built-in micro-printer and 32-bit microprocessor, support automatic mass reading and electronic report generation, easy to operate and firm structure.
High Accuracy Sensor is used to ensure stable weighing, Density direct reading reaction time is less than 3 seconds, Density upper and lower limits and specific gravity paraMeters can be customized, and solid Density, volume and metal purity measurement are supported.
Using diffuse transmission optical path design, optical density Measurement range 0.00-6 OD, light transmitance accuracy +/- 2%, can simultaneously measure light transmitance, absolute optical density, relative optical density and Dot area ratio.
Using swirl/spin vibration mode, frequency 250 rpm, vibration amplitude 3mm, long life motor and 32-bit embedded processor, with low cost, low power consumption and strong Stability, easy operation and firm structure.
High Accuracy weighing system with density accuracy of 0.001g/cm ³, maximum weighing of 210g, built-in density reference program, support for solid and liquid density testing, equipped with level indicator and overload alarm function.
Adopting a dual-station design, the vibration frequency is 250 rpm, and it is equipped with a 4.3-inch touchscreen and an embedded micro-printer. It supports electronic report generation and remote software upgrades. The structure is firm and easy to operate.
The double tap design can be used alone or in combination, the maximum Vacuum Level is -0.098Mpa, the special fluid muffler reduces noise, and the stainless steel shaft core enhances durability, which is suitable for a variety of experimental environments.
The four-tap design can be used alone or in combination, the maximum Vacuum Level is 0.098Mpa, the special fluid muffler reduces noise, and the stainless steel shaft core enhances durability, which is suitable for a variety of laboratory environments.
Adopt swirl/spin vibration mode, vibration frequency 250 rpm, vibration amplitude 3mm, built-in embedded micro-printer, calculation results are accurate to 3 decimal places, with excellent network connection ability.
Using circulating water as the working fluid, the maximum Vacuum Level is -0.098Mpa, the pumping rate is 80L/min, the special fluid muffler reduces the noise, the double tap design can be used alone or in combination, and the ABS engineering plastic shell is resistant to corrosion.
Adopting dual-station design and 250 rpm vibration frequency, equipped with 3mm vibration amplitude and built-in micro-printer, the calculation results are accurate to 3 decimal places, and support electronic report generation and remote software upgrade.
