4 finished shoes can be tested at the same time, the folding angle can be adjusted by 5-80 degrees, and the torsion resistance rate can be adjusted by 5-150rpm. It is driven by a variable frequency motor to meet the standard test requirements.
Can test 4 shoes at the same time, bending angle 0 °~ 90 ° adjustable, Test speed 0~ 140 times/min, with automatic return and LCD counter function.
Using 300W solar bulbs and hot air circulation heating, Temperature range RT +~ 120 ℃, can accurately control the test conditions, determination of material under light yellowing resistance performance, suitable for a variety of shoe material testing.
Temperature range -30 ℃ to + 100 ℃, equipped with stainless steel inner and outer boxes and environmentally friendly refrigerant, supports multi-station fixture testing, can precisely control the folding mode and record data changes in real time.
Using carbon steel shaft and toothed belt drive, Bending Frequency 0-155 times/min adjustable, with low abrasion, low noise and shock-proof design to ensure accurate and stable testing.
Support 4 specimens synchronous testing, folding angle 0-45 degrees adjustable, folding speed 80 +/- 5cpm, using LCD counter to achieve accurate counting, to meet the requirements of material refractive performance evaluation.
Using 45 degree angle fixed test, equipped with adjustable load (500g/250g) and adjustable traverse speed (5mm/s), electric control running smooth noise is small, Test Travel can reach 90mm, the platform is suitable for a variety of samples.
Three sets of samples can be tested simultaneously, supporting two standard methods of no presser foot and presser foot, adjustable fixture movement amplitude, frequency conversion speed regulation, and automatic counting and shutdown functions after reaching the set number of times.
The pressure spring constant linear relationship, pressure needle Travel 0-2.5 mm, measurement error +/- 1HC, can be hand-held or installed measuring frame, suitable for shoe microporous hardness of materials testing.
Load analysis degree of 1/10000, Precision force less than 0.5%, effective Travel 700mm, can be tensile, compression, bending and other tests, suitable for a variety of material testing.
With a 45 ° test angle and an adjustable speed of 5mm/sec, equipped with a 500g weight and a standard pencil set, stable and low-noise electric control is achieved through a stepper motor.
It adopts annular halogen lamp heating and multi-layer stainless steel heating Chamber, heating up fast and uniform, moisture measurement accuracy of 0.1%, equipped with German imported Sensor to ensure stable weighing, support data storage and printing functions.
With 50Kg capacity selection and +/- 0.5% displacement indication accuracy, support tensile, compressive, tearing and other test modes, frequency conversion motor to ensure stable operation.
With 0.001N.m torque resolution and 1-3000 ° swirl/spin range, support preset force value and angle two Measurement mode, real-time display of stiffness and automatic calculation of statistical pass rate, to meet a variety of standard testing needs.
With 0.001N.m torque resolution, support 1-3000 ° swirl/spin range adjustable, provide real-time stiffness display and 10 sets of Data storage functions, can set qualified interval judgment and maximum peak test mode.
