Impact performance of the reflective film can be accurately measured by using the principle of free fall of steel ball, steel ball mass 450 +/- 3g, drop 250mm, reasonable structure and simple operation, safe and reliable measurement.
With 1000g drop weight and 8mm punch, Impact height can be adjusted to 100cm, the degree of film damage is tested by free fall, and the structure is stable and easy to operate.
The single-arm double-column structure is equipped with an electric lifting device, with a drop height range of 300-1500mm, a test load of 0-80kg, and a buffer device to improve service life and stability. The height error does not exceed 2%.
Pneumatic fixture is used to protect the pRoduct from deformation, and a protective box is equipped to prevent the specimen from rushing out. The drop height is adjustable from 300-1500mm, the test load is 2kg, and the height is displayed by High Accuracy steel ruler and digital display Meter.
Adopt electric push Rod to drive Spreader movement, adjustable speed range of 2-200mm/s, temperature accuracy +/- 3 ℃, support Vacuum chuck and electric heating function, improve Spreader uniformity and operation convenience.
Adopting a pure oil-free lubrication piston system, equipped with a 60L anti-rust and antibacterial gas storage Tank, with an exhaust capacity of 304L/min and a noise of only 60dB. It has multiple automatic protection functions and is easy to operate without the need for a special person to be on duty.
With a 45 ° test angle and an adjustable speed of 5mm/sec, equipped with a 500g weight and a standard pencil set, stable and low-noise electric control is achieved through a stepper motor.
Rotation speed of 10000rpm is achieved by using 750W three-phase asynchronous motor, and the electric lifting platform supports 300mm Travel, which can handle 10L materials and work continuously for a long time.
The pure oil-free design ensures that the gas is clean and pollution-free, the exhaust volume reaches 608L/min to meet the high-efficiency gas supply demand, the noise control is about 45 decibels to achieve ultra-quiet operation, the automatic operation does not require special personnel to be on duty, and the optional dew point of the dryer is supported as low as -60.
Pure oil-free design, displacement 116L/min, exhaust pressure 8bar, automatic start and stop, low energy consumption, high gas cleanliness, simple operation and convenient maintenance.
Using electromagnetic motor and diaphragm sealing Chamber, Vacuum Level up to 0.08Mpa, pumping rate 60L/min, non-oil pump design pollution-free, full Teflon material resistant to strong acid and alkali corrosion, free of daily maintenance.
Mirror stainless steel liner and electric heating film heating, Temperature Uniformity +/- 1 ℃, heating speed, double-decked door design to reduce heat loss, four corners arc easy to clean.
Noise is as low as 54 decibels at work, displacement is 155 liters per minute, pure oil-free piston system ensures clean gas, Nano coating cylinder liner enhances durability, automatic start-stop saves energy and saves electricity.
The pure oil-free design ensures that the gas is clean, the noise is only 53 decibels, the exhaust volume is 230L/min, the automatic start-stop energy saving and worry-free, and the anti-rust and anti-bacterial treatment of the gas storage Tank ensures safety.
Using 4000W three-phase asynchronous motor, Speed range 0-2800rpm, equipped with a variety of stator heads to adapt to different material viscosity, electric lift Travel up to 700mm, support long-term operation with low temperature rise.
