Measurement range 0.5-3000 μm, maximum resolution 0.1μm, support more than 30 image analysis functions, Particle size distribution and morphology analysis.
Using laser scattering technology, a single measurement can simultaneously display up to five particle size particulate matter (PM) concentrations, Sensitivity of 0.001 mg/m ³, no need to replace the cutting head, support continuous monitoring and Data storage functions.
Three grid irreversible discoloration design, temperature point 50 ℃, 70 ℃, 85 ℃, with protective film waterproof and oil-proof, size 12x30mm, easy to paste and long-term use.
Three-grid design covers the range of 50 ° C to 120 ° C, irreversible discoloration records temperature changes, with protective film with waterproof and oil-proof characteristics, size 12x30mm is easy to paste.
Irreversible discoloration records the highest temperature, 10 rectangular temperature points cover the range of 188~ 249 ℃, waterproof and oil-proof material ensures stable use in harsh environments, size 51 * 18mm is easy to paste.
High Accuracy Electromagnetic Force equilibrate Sensor, Readability up to 0.1mg, Support solid, liquid and particulate matter (PM) density measurement, Built-in RS232 interface for easy data recording, Ensure measurement results Repeatability and accuracy.
The pumping speed is 0.5L/S, the noise is as low as 62dB, and it is equipped with a gas ballast valve to prevent the pump oil from mixing with water. The anti-return oil safety device is adopted, and the size is small and convenient to start.
Film thickness 0.5mm fillet edge no burr design, with anti-rust oil to protect the surface, suitable for adhesion, hardness and other paint performance testing experiments, about 120 pieces per kilogram Encasement.
KF25 joint diaMeter, filtrate diaMeter ≥ 25um particulate matter (PM), yellow filter can be cleaned or replaced in time, suitable for pumping speed ≤ 6L/s Vacuumpump, slightly affect pumping speed and Vacuum Level.
Using irreversible discoloration technology, ten temperature monitoring points cover the range of 77-127 ° C, with waterproof and oil-proof performance, 51 * 18mm compact size is easy to paste, and the highest temperature value experienced is recorded in real time.
As an Optional accessory of air Compressor, it can effectively separate oil and water, improve compressed air mass, and is suitable for industrial environments that require gas purity.
The pumping rate is 4L/s, the noise value is 68dB (A), the gas ballast valve is used to prevent the pump oil from mixing, the size is small and easy to start, and a variety of interface configurations are supported.
Adopt oil pump forced oil inlet device, can operate continuously under 1.33 × 10 ³ Pa intake pressure, gas distribution ballast to prevent pump oil mixing, pumping speed 2L/S, Ultimate vacuum degree up to 0.006mbar, support a variety of interface conversion.
Pure oil-free design, displacement 116L/min, exhaust pressure 8bar, automatic start and stop, low energy consumption, high gas cleanliness, simple operation and convenient maintenance.
The pure oil-free design ensures that the gas has no oil molecules, the noise is as low as 59dB, the lame plating in the gas storage Tank is rust-proof, the service life is more than 15,000 hours, the exhaust pressure is adjustable from 5 to 8 Bar, and the automatic pressure switch controls start and stop.
