With 450 +/- 2g brush weight and 300mm scrubbing Travel, scrubbing speed 37 +/- 2cpm, can accurately test the anti-scrubbing performance of coatings, suitable for interior and exterior wall coating inspection.
The equipment evaluates the performance by recording the number of wipes required for coating damage, the Wipe Test Frequency is 20~ 60cpm, the friction load is 1000 +/- 10g, and the standard test method is supported.
The equipment adopts 1000 +/- 10g friction load and 0~ 60cpm wiping frequency, and the number of times required for coating damage is determined by reciprocating wiping, and the automatic counting function ensures the accuracy of the test.
The wiping stroke is 120mm, the wiping frequency is 100cpm, and the friction load is 1000g. The number and speed of wiping can be set, and the automatic stop function ensures the accuracy of the test.
Travel 100mm, Frequency 100cpm, friction load 1000 +/- 100g, grinding head area 2cm ², can accurately test the coating solvent performance.
Adopting double column diagonal support structure is convenient for disassembly and washing, equipped with five layers of filtrate net to effectively filtrate impurities, equipped with return buffer system to eliminate bubbles, and thermostatic fuel Tank to keep Flow rate stable.
Using the mechanical action of throwing knife roller and bottom knife, it can handle 200-700g dead stock, pulp Tank volume 45 liters, Rotation speed 500 +/- 10rpm, and realize fine processing such as fiber cutting, crushing, rubbing and splitting.
Vertical design, motor and drying system separation, small vibration, low noise, high dehydrating efficiency, Rotation speed of 2800 rpm, dehydrating weight 0-500g, accurate timing, easy to use.
The water pRoduction rate reaches 10L/h, the water intake Flow velocity is 1.0L/min, and the RO membrane intelligent anti-scale washing and automatic domestic circulation system are used to ensure stable water quality and meet the high standard requirements of the laboratory.
The test bench has good anti-vibration performance, bearing weight of 80kg, angle adjustment range of 0-15 °, simple operation, and is suitable for mechanical Stability assessment of various household appliances.
Table diaMeter 800mm, angle adjustment range 0-30 °, bearing capacity of 80kg, good anti-vibration performance, suitable for a variety of home appliances Stability test.
Using fixed funnel method to measure powder flowability, equipped with 10mm inner through Glass funnel and 0-100mm scale struts, can accurately measure cone height, meet the requirements of Pharmacopoeia and ISO standards.
The dual-station design can simultaneously carry out two sample tests, the friction speed is 30CPM, the friction hammer load is 200g, and it has the power-off memory function to support dry and wet friction and organic solvent friction test.
The table diaMeter is 1000mm, the bearing capacity is 120kg, the angle adjustment range is 0-30 °, and the anti-vibration performance is good. It is suitable for mechanical Stability assessment of various household appliances.
Good anti-vibration performance, bearing capacity of 50kg, angle adjustment range of 0-30 °, simple operation, suitable for a variety of home appliances Stability test, to ensure accurate Mechanical Property Assessment.
