U-shaped vibrating tube densitoMeter

The U-shaped vibrating tube densitometer calculates the density of a fluid by measuring the change in vibration frequency as the fluid flows through the U-shaped vibrating tube. It is used to detect the density of liquids or gases and is suitable for quality control in industries such as chemical engineering and petroleum.
Selection
When selecting, consider the measurement range, accuracy, fluid compatibility, environmental adaptability, calibration convenience, and maintenance requirements. Match the instrument parameters based on the specific sample type and operating conditions to ensure long-term stable operation.

Terms

Standards

Instruments

Using U-tube oscillation principle, density resolution of 0.0001g/cm ³, built-in injection pump and video camera function, automatic cleaning and drying, support concentration conversion and a variety of output methods.

$ 6213.00

Using U-tube oscillation principle, with Peltier precise temperature control technology, density resolution of 0.0001g/cm ³, built-in injection pump and drying air pump, automatic injection, cleaning and drying, high-resolution video direct observation of samples to avoid bubble influence.

$ 4227.00

Measurement accuracy of 0.001g/cm ³, built-in automatic sampling pump and high-resolution video observation function, support for Peltier temperature control technology, ensure accurate and reliable test results.

$ 3399.00

Using U-tube oscillation principle, density resolution of 0.0001g/cm ³, built-in injection pump and video camera, automatic cleaning and drying, support concentration conversion and a variety of Data output methods.

$ 5468.00

Using U-tube oscillation principle, density resolution of 0.0001g/cm ³, repeatability error of 0.0006g/cm ³, built-in injection pump and video camera, automatic cleaning and drying, support concentration conversion and a variety of data output.

$ 4848.00

Using U-tube vibration principle, only 2-3ml sample can complete the measurement, measurement Precision up to +/- 0.0008g/cm ³, built-in Peltier temperature control device to ensure temperature control accuracy.

$ 7625.00

U-shaped tube structure, viscosity measurement range of 20-100cSt, based on the liquid flow time in capillary tubing is proportional to the viscosity principle, to ensure accurate and reliable measurement.

$ 461.00

U-shaped tube structure design, viscosity measurement range covering 600 to 3000cSt, High Accuracy liquid viscosity measurement based on capillary tubing principle, easy and reliable operation.

$ 461.00

U-shaped tube design, viscosity measurement range of 2-10cSt, based on the principle of liquid flow time in capillary tubing is proportional to viscosity, accurate viscosity measurement can be achieved.

$ 461.00

Contains 216 Classic Colors, semi-matte surface, full page color sample size 5.0x15.0cm, monochrome design for easy comparison, with U-shaped protective cover for loss prevention.

$ 145.00

U-shaped design to achieve one-time scraping, application width 80mm, wet film thickness can be selected 200μm or 250μm, CR12 molybdenum vanadium material to ensure durability.

$ 138.00

Adopting the principle of U-tube vibration method, Sensitivity up to 0.0001g/cm ³, equipped with automatic sampling system and Peltier thermostatic control to ensure measurement accuracy and Repeatability, support automatic cleaning to avoid residual effects.

$ 4124.00

U-shaped tube design, viscosity measurement range of 200-1000cSt, based on the principle of capillary tubing can accurately determine the kinematic viscosity of liquids at constant temperature.

$ 461.00

Using U-tube vibration principle, only 2-3ml sample can be measured, density Precision +/- 0.0005g/cm ³, built-in Peltier temperature control device, support a variety of communication interfaces and user management functions.

$ 9239.00

Using U-tube vibration principle, only 2-3ml sample, measurement Precision up to +/- 0.0003g/cm ³, built-in high definition camera video observation and up to 20 Measurement modes, support four levels of user rights management.

$ 12466.00

Articles

Application of Cone-and-Plate Viscometer in Determining the Rheological Curve of Non-Newtonian Fluids in UV Inks
This article introduces how a cone-plate viscometer measures the rheological curve of UV ink. UV ink is a non-Newtonian fluid whose viscosity changes with shear rate.
Selection of UV Energy Meter: Matching Band Response with Energy Range
When selecting a UV energy meter, the key is to match two parameters: spectral response and energy range.
Stormer Viscometer for Determining Krebs Viscosity of Paints
This article introduces the method of measuring the Krebs viscosity value of colored paints using a Stormer viscometer. Viscosity is a key indicator that affects the application and storage of coatings. The Krebs unit (KU) quantifies viscosity based on the resistance encountered by a rotor as it rotates within the paint sample.
Stormer viscometer measures the KU viscosity of latex paint
This article introduces the method of measuring the KU viscosity of latex paint using a Stormer viscometer. The viscometer measures the load required to maintain a fixed rotational speed through the rotation of its paddle, thereby calculating the KU value, which is related to the application and storage properties of the coating.
The role of a reflection densitometer in controlling printing ink concentration.
The reflection densitometer measures the light reflectance of the ink layer and converts it into a density value, thereby objectively reflecting the thickness and concentration of the ink layer. In printing, it is used to monitor solid density, ensuring stable ink supply, replacing subjective judgment, and enabling data-driven control.
Application of Roll-to-Roll Coating Machine in UV-Curable Coatings
This article introduces the synergistic application of roll-to-roll coating machines and UV curing systems in the production of UV-curable coatings.
Rotational Viscometer vs. Stormer Viscometer: How to Choose the Right Instrument Based on Coating Type
The rotational viscometer measures viscosity by detecting rotor torque and can analyze rheological properties at different shear rates, making it suitable for research and precise measurements. The Stormer viscometer uses the load at a fixed rotational speed to determine the KU value, simulating construction conditions, and is commonly used for rapid on-site evaluation of coating application performance.
Density Determination: Selection Strategy between Pycnometer Method and Densimeter Method
This article introduces two methods for measuring the density of substances: the pycnometer method and the densimeter method. The pycnometer method calculates density by measuring the mass of a sample of fixed volume. It is suitable for measuring liquids, powders, and small granular solids, offering high precision but slower operation, and requires temperature control.
Application of Stormer Viscometer KU Value in Coating Viscosity Control
This article introduces the application of KU values measured by the Stormer viscometer in the coatings industry. The KU value reflects the viscosity of coatings by measuring the torque at a specific rotational speed, with higher numbers indicating greater viscosity.
How to Choose a Paint Film Cross-Cutter? A Guide to Understanding Key Technical Points
In the field of coating quality control, the Cross-Cut Test is a classic and essential method for evaluating coating adhesion. This article provides a detailed introduction to its selection logic.