Adopt air condensation technology instead of water condensation, Temperature control accuracy +/- 2 ℃, equipped with 12 heating holes, heating up to 170 ℃ time is less than 30 minutes, support segmented timing function.
Double-decked serpentine coil condensation design, chilled down area of 0.15m ², maximum evaporation capacity of 22ml/min, with automatic lifting function and anti-dry burn Safety protection, to ensure efficient and safe Sample Handling.
Adsorption drying technology can reduce the dewpoint temperature to -20 ° C, Flow rate loss control within 10%, effectively prevent the condensation of oil and gas mixtures in the gas storage Tank, and ensure the lubrication effect of the equipment.
Temperature range -40~ 150 ℃, Temperature Uniformity ≤ 2.0 ℃, mirror stainless steel inner wall and binary cascade refrigeration system, equipped with observation window and anti-condensation device.
Provide a wide temperature range of -70 ° C to 150 ° C, 1000L large-volume studio, Temperature Uniformity ≤ 2.0 ° C, using binary cascade refrigeration and automatic adjustment system to ensure stable and efficient operation.
The principle of thermal radiation is used to keep the liquid temperature below the boiling point and avoid water droplets in the gas. The double condensation cycle design improves the extraction effect of pure water, and the output of pure water reaches 800-1000ml/hour. No heavy metals are detected by flameless atomic absorption analysis.
Mirror stainless steel inner wall and fiberglass insulation material, temperature range -70~ 150 ℃, uniformity ≤ 2.0 ℃, equipped with automatic adjustment refrigeration system and anti-condensation device to ensure stability testing environment.
Temperature range -40~ 150 ℃, Fluctuation ≤ 0.5 ℃, mirror stainless steel inner wall and fiberglass insulation material, equipped with observation window and anti-condensation device, support automatic adjustment of refrigeration operation.
The circular stainless steel liner is used to prevent condensation and dripping, the copper tube bell mouth is designed with good air tightness and low water consumption, and the special high temperature foaming material improves the pressure life. It is equipped with a 16L large-capacity water Tank and an automatic water replenishment system.
The principle of thermal radiation is used to keep the liquid phase temperature below the boiling point, avoid boiling water droplets, and complete gas-liquid separation; the double condensation cycle design improves the extraction efficiency of pure water, the output of pure water reaches 400-500ml/hour, and the Heating power is 800-1000W to ensure that no heavy metals are detected.
Adopt air jacket indirect temperature control to avoid condensation, dry moisture ratio control humidity Response fast, background concentration as low as formaldehyde ≤ 0.006mg/m ³, support automatic temperature control and humidity control and multiple safety protection, suitable for material environmental protection assessment.
The temperature range covers -70 ° C to + 150 ° C, 1000L large-volume studio, using mirror stainless steel inner wall and fiberglass insulation material, equipped with automatic refrigeration adjustment and anti-condensation device to ensure stable and reliable test environment.
The stainless steel mirror heating Chamber and intermittent continuous heating technology are used to heat the sample evenly, with a heat-resistant temperature of more than 200 ° C. Equipped with HBM Sensor, it can remember multiple sets of drying processes and support three heating modes.
The digital display temperature control is accurate and reliable, the hot air circulation system is composed of a high temperature fan and a suitable air duct to improve the Temperature uniformity in the working room, and the heating wire is installed at the bottom to heat up quickly.
Inner Chamber dimensions 800 * 1000 * 1000mm, Temperature range -60~ 150 ℃, humidity control 30~ 98% RH, multi-wing air supply circulation and independent refrigeration system, uniform temperature and humidity distribution, low failure rate.
