The use of low-energy centrifugal fans makes the airflow uniform and stable, with an average wind speed of 0.25 to 0.45m/s and noise less than or equal to 62dB (A). The mirror stainless steel countertop is corrosion-resistant and easy to clean, and the tripod and cabinet are separated for easy transportation.
Vertical design, motor and drying system separation, small vibration, low noise, high dehydrating efficiency, Rotation speed of 2800 rpm, dehydrating weight 0-500g, accurate timing, easy to use.
Adopt back heating and horizontal forced convection design, Temperature Fluctuation +/- 0.5 ℃, Temperature range + 10 ℃~ 200 ℃, Sensor fault alarm and 9999 minutes timing function to ensure stable and efficient experiment.
Adopt 4mm small diaMeter design, suitable for surface or small area measurement; Repeatability Delta E * ab < 0.05 to ensure Measurement accuracy; Horizontal structure is small in size, comfortable and stable to hold.
Using 200g weight and 1cm ² bottom area design, in line with GB/T 1728 standard, through the filter paper test method to accurately determine the film surface drying and practical drying time, easy to operate, reliable results.
Using 200 +/- 0.2 g weight and 1 square centiMeter bottom area design, the drying process of the paint film was accurately determined by the cotton ball method to distinguish between surface drying and actual stages in drying.
The circular track is used to automatically record the film drying process continuously, equipped with 4 kinds of specifications to choose from, the track diaMeter is 100mm, and the measurement error is +/- 0.5%, which can intuitively analyze the stages in drying state.
Double station design can process two samples at the same time, Vacuum Level up to -0.098MPa, drying time only 4-6 minutes, suitable for rapid drying of wet paper samples with a diaMeter of no more than 200mm.
Maximum load 0.5KN, designed for small force test, compact structure, easy operation, ensure test Stability and Repeatability.
Using arc surface drying plate design, the maximum temperature can reach 180 ℃, Heating power 2500W, the steam is quickly discharged during the drying process, easy to operate and maintenance-free.
Infrared heat source for fast drying, Power 550W, metal material to ensure durability, built-in heating element to pRoduce uniform heat cycle, effective evaporation of water, suitable for drying various materials.
Using swirl/spin design, light weight and easy to move, can effectively improve the Measurement accuracy and prevent the instrument from falling, suitable for small workpiece measurement scenarios.
Using infrared radiation heating, fine grinding mirror drying surface, heating power 2.0KW, maximum temperature 180 ℃, drying size 600mm × 350mm, to ensure uniform drying and smooth surface.
Vacuum heating drying technology, Vacuum Level up to -0.098MPa, pumping 80-120 liters/min, drying time is only 4-6 minutes, with intelligent PID temperature control and over-temperature alarm function, easy and safe operation.
Impact energy 2.7mJ, Impact device mass 75g, small damage to the measured surface, does not damage the hardened layer, suitable for measurement of small and thin parts, the minimum thickness of the specimen is 1mm, and the minimum depth of the hardened layer is 0.2mm.
