Photoelectric Water Accumulation ColoriMeter

The photoelectric colorimeter measures color by illuminating the sample with a light source, detecting the intensity of the reflected light, converting it into an electrical signal, and analyzing the color data. It is used for color quality control in industries such as coatings and plastics to ensure consistent product color.
Selection
When selecting a photoelectric water accumulation colorimeter, consider measurement accuracy, sample adaptability, ease of operation, and maintenance costs. Ensure the instrument complies with industry standards, is stable and durable, and meets daily testing requirements.

Terms

Instruments

304 stainless steel is used to ensure long-term use without rusting, equipped with 100ml standard glassgraduates with scale and 12.7mm outflow diaMeter funnel, and the unit volume mass of dust in the loose state is determined by free fall, which meets the requirements of national standards.

$ 525.00

Adopt photoelectric detection and microcomputer servo system, High Sensitivity, Measurement range +/- 45 °, Minimum reading +/- 0.001 °, Repeatability ≤ 0.002 °, LED display and membrane switch operation for easy reading, Cast aluminum base to ensure Stability.

$ 1372.00

Using photoelectric detection and automatic dial display, the measurement range is +/- 45 °, the minimum reading is 0.001 °, and the low optical rotation sample can be accurately analyzed, and the operation is simple.

$ 1380.00

With photoelectric non-contact and contact dual measurement function, Measurement range photoelectric 2.5~ 99999rpm, contact 0.5~ 19999rpm, automatic memory MAX Maximum, MIN Minimum and last value, rugged and portable structure, support USB and Bluetooth data output.

$ 267.00

Using parallel illumination hemispherical scattering integrating sphere photoelectric receiving mode, the accuracy of light transmitance and haze display is 0.01%, equipped with thin film magnetic fixture and liquid sample Cup, and supports 2000 sets of data storage.

$ 3882.00

Using 60 ° taper funnel and 100ml standard glassgraduates with scale, the unit volume mass of the dust in the loose state was measured by free fall to ensure the accuracy and reliability of the test results.

$ 378.00

Using parallel illumination hemisphere scattering integrating sphere photoelectric reception mode, light transmitance measurement range 0-100%, haze measurement range 0-99%, with open sample window design, not affected by environment light.

$ 2629.00

Colorimetry with platinum and cobalt, measurement range 0.00~ 100PCU, resolution 0.01PCU, imported high luminance Illuminant life of 100,000 hours, Optical inspection stability, support data storage and printing functions.

$ 637.00

Measurement mode with photoelectric non-contact and contact, Rotation speed and linear speed can be measured; MAX Maximum, MIN Minimum and final value during automatic memory measurement; Measurement range wide, accuracy up to +/- (0.05% n + 1d), Sampling time 1.0 seconds.

$ 323.00

Using photoelectric automatic equilibrating principle, measurement range +/- 45 ° optical rotation and +/- 120 ° Z sugar content, minimum reading +/- 0.001 °, equipped with color LCD Touchscreen and USB interface, support automatic retest 6 times and calculate the average value.

$ 1752.00

Imported long-life Illuminant and narrowband filter system, Optical inspection stability, 20 minutes drift less than 0.002A, support users to calibrate Linear dispersion, suitable for a variety of water quality testing.

$ 567.00

The photoelectric counter is used to realize automatic counting, and the measurement is fast and accurate; the period of M-3 swing Rod is 0.625s, and the swing time on standard Glass is 440 +/- 6s; the horizontal mechanism is improved, and the scale can be moved horizontally to facilitate zero adjustment.

$ 451.00

Imported long-life Illuminant and narrowband filter system, Optical inspection stability, 20 minutes drift less than 0.002A; can store 10 Linear dispersion and 500 data, support USB interface upload, anti-corrosion case design.

$ 704.00

Using photoelectric detection technology to automatically identify the initial and final melting points, equipped with Platinum Resistance Sensor to ensure +/- 0.5 ℃ accuracy, support eight linear heating rate and automatic storage function, no manual monitoring can complete the measurement.

$ 1116.00

Adopt 4mm demoulding hole design to avoid the accumulation of paints; equipped with protective PE film to effectively prevent scratches and corrosion; size is 130x239x0.8mm, material is Aluminum Panel, easy to hang and test operation.

$ 556.00

Articles

Spectrophotometer measures ink spectral reflectance and opacity.
This article introduces how to measure the hiding power of ink using a spectrophotometer. The instrument irradiates the ink sample, measures its reflectance within the visible light spectrum, and calculates the hiding power using the Kubelka-Munk model.
The combination of hiding power chart paper and a spectrophotometer enables the digital evaluation of hiding power.
This article introduces how to combine hiding power cards with spectrophotometers to achieve digital assessment of hiding power.
Colorimeter evaluation of color difference in anodized coloring layers
This article explains how colorimeters are used to evaluate color differences in anodized coloring layers. It describes how colorimeters convert colors into numerical values based on international standards and quantify color variations by calculating the color difference ΔE.
A spectrophotometer uses digital language to describe colors, making color differences impossible to hide.
A spectrophotometer measures the color of an object through spectral analysis, converting reflected light data into spectral curves. It then calculates chromaticity parameters such as L*a*b* based on international standards, achieving a digital representation of color.
How to Interpret Color Difference Lab Values Measured by a Spectrophotometer? Save This Color Difference Judgment Standard Now!
This article explains how spectrophotometers measure and evaluate color differences using the Lab color space. In the Lab values, L represents lightness, while a and b indicate the red-green and yellow-blue color biases. The color difference ΔE is calculated using a formula to quantify the variation between a sample and the standard.