Reaction Vessel Mixer

The reaction mixer drives the stirring blades to rotate via an electric motor, ensuring uniform mixing of materials within the container and promoting chemical reactions. It is used in laboratories for the preparation of samples such as coatings and inks, ensuring thorough contact and reaction of the components.
Selection
When selecting a reaction mixer, considerations should include the viscosity of the material, the capacity of the container, and the range of mixing speeds. It is essential to match the motor power and blade type, ensure sealing to adapt to various chemical environments, and check for ease of operation and maintenance requirements.

Terms

Standards

Instruments

Equipped with microwave ultrasonic individual and collaborative control functions, equipped with 2000ml reaction vessel and 1800W ultrasonic Power, supports infrared temperature measurement and magnetic stirring, and can achieve a variety of synthesis conditions.

$ 17178.00

It has the functions of microwave and ultrasonic control alone and synergistically, adopts platinum resistance temperature measurement accuracy +/- 1 ℃, supports 0-2500rpm magnetic stirring, and accelerates the reaction process through cavitation effect and frequency conversion microwave.

$ 15887.00

With microwave and ultrasonic synergy function, support 500ml reaction vessel, ultrasonic Power 1800W can be fine-tuned, Frequency 20KHz, integrated infrared temperature control and magnetic stirring, suitable for a variety of synthesis conditions to accelerate the reaction.

$ 17178.00

Equipped with 2500W Ultrasonic Power and 20KHz Frequency, it supports automatic Power regulation and pulse control, and can perform homogeneous emulsification and stirring operations at the same time. Glass Reaction Kettle is resistant to corrosion and has a processing capacity of 10L.

$ 8884.00

With microwave ultrasonic separate control and coordination function, support 1000ml reaction capacity and 1800W ultrasonic Power, using infrared temperature sensor and magnetic stirringdevice, can realize multi-mode reaction operation.

$ 17178.00

Using high borosilicate Glass material, corrosion resistance and can withstand -80~ 200 ℃ Operating temperature, vacuum negative pressure of 0.095MPa, equipped with PTFE four-leaf stirringRod and RWD50 top Stirrer, Speed range 50~ 500rpm, support precise control and uniform material reaction.

$ 2675.00

High borosilicate Glass material, corrosion resistance and high and low temperature resistance, strong ability to withstand thermal Impact; vacuum negative pressure can reach 0.095MPa, support material reaction under negative pressure; Overhead Stirrer Rotation speed 50-500rpm, torque 70N.cm, suitable for a variety of viscosity materials.

$ 2465.00

Using PTFE lining acid and alkali resistance, the sealing effect is stable for a long time without leakage, the maximum pressure is 6Mpa, the maximum temperature is 240 ℃, and the small size is convenient for multiple Reaction Kettles to operate at the same time.

$ 590.00

Disperse emulsification homogeneous mixing under vacuum or pressure environment, processing viscosity up to 10000MPas, Operating temperature 170 ℃, equipped with a variety of sensing systems Measuring temperature, pressure, viscosity and other paraMeters, observing the reaction process through Glass kettle.

$ 8045.00

With microwave and ultrasonic coordinated control function, 250ml container capacity with 1800W adjustable ultrasonic Power, infrared temperature sensor and magnetic stirring system, support a variety of reaction modes to expand applications.

$ 17178.00

32 5ml centrifuge tubes can be installed vertically on both sides, using a vertical installation design, suitable for HT-X100 swirl/spin Mixer, improving Sample Handling efficiency.

$ 149.00

Equipped with microwave and ultrasonic synergy function, 2000ml large-capacity reactor and 1800W ultrasonic power, support platinum resistance accurate temperature measurement and magnetic stirring, and realize multi-mode chemical reaction control.

$ 15887.00

Double-sided horizontal mounting design can accommodate 40 centrifuge tubes simultaneously, compatible with 1.5ml and 2.0ml specifications, suitable for swirl/spin Mixer for efficient Sample Handling.

$ 149.00

Adopting rotary oscillation design, Frequency 3000rpm, pendulum amplitude 5mm, suitable for small containers such as testtube and Colorimetric tube, it can efficiently handle the experimental requirements of large chemical reactions and few solutions.

$ 125.00

Using the rotary oscillation mode, Oscillation Frequency up to 3000 rpm, swing amplitude of 5mm, through smooth contact to achieve rapid mixing, speed can be adjusted with pressure, suitable for a variety of laboratory applications.

$ 133.00

Articles

Lab Mixer Selection - Viscosity Determines Torque
This article mainly discusses how to select a laboratory mixer based on the viscosity of the material. The higher the viscosity, the greater the torque required. Low-viscosity liquids are suitable for high speed and low torque, while high-viscosity materials require low speed and high torque.
Application of Karl Fischer Micro Moisture Meter in Moisture Control of Lithium Battery Electrolyte
The Karl Fischer micro-moisture analyzer is based on the Karl Fischer titration principle, which measures trace moisture in lithium battery electrolytes through the quantitative reaction between iodine and water.
Differential Scanning Calorimetry measures the heat of curing reaction of thermosetting polymers.
Differential scanning calorimetry is a commonly used technique for studying the curing reactions of thermosetting polymers. It measures the heat released by a sample during heating to obtain key parameters such as reaction enthalpy and curing temperature.
Differential Scanning Calorimetry for Measuring the Degree of Cure of Polymer Optical Waveguide Materials
This article introduces a method for determining the degree of curing in polymer optical waveguide materials using a differential scanning calorimeter. The degree of curing is a key indicator affecting material performance, and this instrument quantitatively analyzes it by measuring the thermal effects during the curing reaction.
Differential Scanning Calorimetry Study on the Curing Reaction Kinetics of Epoxy Resin
This article introduces the method of using differential scanning calorimetry to study the curing reaction kinetics of epoxy resins.
Karl Fischer Moisture Analyzer for Determining Moisture Content in Coatings
This article introduces a method for determining the moisture content in coatings using a Karl Fischer moisture titrator. It is based on the quantitative reaction of reagents such as iodine and sulfur dioxide with water, and calculates the moisture content by measuring the amount of reagent consumed during titration.
Determination of free amino acid content in protein solutions using a microtitration apparatus.
This article introduces a method for determining the free amino acid content in protein solutions using a microtiter plate reader. It is based on the ninhydrin color reaction, where amino acids react with the reagent under specific conditions to produce colored compounds, and the concentration is calculated by measuring the absorbance.
Operating Specifications for the Determination of Hexavalent Chromium Content in Wastewater Using Colorimetric Titration Apparatus
This article introduces the standard operating procedure for determining hexavalent chromium content in wastewater using a colorimetric titrator. The method is based on the reaction between hexavalent chromium and diphenylcarbazide under acidic conditions to form a purplish-red complex, with the titration endpoint determined by monitoring changes in absorbance at a wavelength of 540 nanometers.
Automatic potentiometric titration method for determining hydrogen peroxide concentration by redox method
This article introduces a method for determining the concentration of hydrogen peroxide using an automatic potentiometric titrator. It is based on the redox reaction between potassium permanganate and hydrogen peroxide under acidic conditions, with the titration endpoint automatically determined by the abrupt change in potential.
Application of Automatic Potentiometric Titrator in Chloride Ion Detection in Drinking Water
This article introduces a method for detecting chloride ions in drinking water using an automatic potentiometric titrator. The principle involves allowing chloride ions in the water sample to react with silver nitrate to form a precipitate. The instrument monitors changes in potential through an electrode, automatically determines the endpoint of the reaction, and calculates the chloride ion content.
Total Chlorine Content Microcoulometric Titration Detector for Pulp
This article introduces a method for detecting the total chlorine content in pulp using a microcoulometric titrator. The principle involves generating a titrant through electrolysis, which reacts with chloride ions produced from the combustion of the sample. The chlorine content is accurately calculated by monitoring the amount of electricity consumed.
Karl Fischer Moisture Analyzer Determines Moisture Content in Powder Coatings
This article introduces the method of determining the moisture content in powder coatings using a Karl Fischer moisture analyzer. Excessive moisture content in powder coatings can affect the quality of the coating, leading to issues such as bubbles. The Karl Fischer method measures moisture through the quantitative reaction of iodine and sulfur dioxide, which is divided into volumetric and coulometric methods.
Karl Fischer moisture analyzer detects moisture content in hot melt adhesives.
This article introduces the method of using a Karl Fischer moisture analyzer to detect the moisture content in hot melt adhesives. The Karl Fischer method is based on the quantitative reaction of iodine, sulfur dioxide, and water, and calculates the moisture content by measuring the amount of iodine consumed.
Differential Scanning Calorimetry Analysis of Coating Curing Reactions
Differential Scanning Calorimetry (DSC) is a technique that analyzes the thermal behavior of materials by measuring the energy difference between a sample and a reference material.
Karl Fischer Moisture Analyzer for Determining Water Content in Coatings
This article introduces the method for determining the water content in coatings using the Karl Fischer moisture analyzer. The principle is based on the quantitative reaction of iodine and sulfur dioxide in the reagent with water. The coulometric method is commonly used to generate iodine through electrolysis and calculate the moisture content by measuring the electrical charge.