Winding speed 1-20R/min adjustable, free tension 25N-250N stepless adjustment, support 2-5mm diaMeter wire test, maximum output torque 40N.m, to meet the needs of different wire diaMeter detection.
The equipment adopts dual-station synchronous unwinding and thermostatic hot pressing technology, the bonding speed is adjustable from 2-10m/min, the hot pressing temperature is room temperature to 200 ° C, the line pressure is 5-50N/mm, and it is equipped with automatic deviation correction and full closed-loop tension control to ensure the material alignment accuracy and stable winding.
Maximum Spreader width up to 1000mm, Spreader speed 1-10m/min adjustable, support unlimited length Spreader and automatic winding, forward and reverse stepless speed change, discharge and receiving reel tension adjustable, heating Rod and glue slot can be quickly disassembled to clean up residual glue.
The equipment supports 400mm maximum Spreader width, Spreader thickness 0.01-2 mm adjustable, with forward and reverse stepless speed change and automatic winding function. The rubber groove and upper rubber wheel can be quickly disassembled and cleaned to adapt to different material tension control needs.
Rotation speed control is accurate and synchronization performance is good; the height of the casting roller can be adjusted to adapt to different solution strength materials; the surface finish of the hard chrome-plated mirror roller is high, and it is equipped with a circulating water chilling down system. Temperature control accuracy +/- 1 ℃.
Folding Angle 0 ° to 142 ° stepless adjustable, folding speed 10~ 2000cpm, imported tension configuration to improve Stability, folding head width 19 +/- 1mm, suitable for a variety of paper material fatigue test.
Adopting convertible Probe design, the curved end is suitable for bobbin diaMeter ≤ 400mm, and the flat end is suitable for bobbin diaMeter > 400mm; equipped with 10mm spherical indenter, Measurement range 10-90H, Accuracy up to +/- 1H, support average calculation and MAX Maximum latch function.
Can be set horizontal longitudinal, speed, angle and tension size, folding angle 135 ° +/- 1 ° adjustable, folding speed 2-200cpm adjustable, equipped with independent cooling system suitable for long-term fatigue test.
The test bending angle is less than 45 degrees, suitable for steel plate thickness 0.5~ 1.0mm and Aluminum Panel thickness 0.5~ 2.0mm. The gear pair and crank lifting mechanism are used to achieve T-shaped bending, which is easy to operate.
Equipped with spherical 2.5mm Φ indenter and convertible Probe, suitable for different diaMeter bobbin measurement, accuracy up to +/- 1H, supports average calculation and MAX Maximum latching, and uses USB or Bluetooth output data.
Suitable for a variety of ion composite ElectRode measurement, providing a stable ion background, 250ml Encasement to meet the needs of routine use in the laboratory, to ensure the stability of ElectRode performance.
Designed for Bromo Iodine Copper Ion Composite ElectRode, it provides a stable reference potential to ensure measurement accuracy, and 250ml Encasement meets the needs of routine laboratory use.
Using wire-wound design, uniform groove is formed by precision winding stainless steel wire, wet film thickness control accuracy reaches 4 μm, application width 220mm, to ensure uniform coating and repeability.
Adopt drawdown blade and bar switchable coating method, Spreader thickness range 0.005-3mm, drying tunnel temperature can reach 350 ℃, support automatic feeding and correction adjustment, realize precision Spreader operation.
Supporting D-type Shore DuroMeter, applying 5kg test force by weight, equipped with Glass bench and adjusting nut to ensure full contact with the sample and improve measurement Stability.
