Low-temperature cooling circulation Bath

The low-temperature cooling circulation bath lowers the liquid temperature inside the bath through compressor or thermoelectric refrigeration technology, and uses a circulation pump to deliver the coolant to external equipment. It is used for constant-temperature cooling of laboratory equipment such as reaction vessels and rotary evaporators, maintaining the low-temperature environment required for chemical reactions or sample processing.
Selection
When selecting, consider the required temperature range and precision, match the equipment interface size and flow rate requirements. Choose air-cooled or water-cooled heat dissipation methods based on the usage environment, and pay attention to the tank capacity and material corrosion resistance. Check safety protection functions and operating noise indicators, and select a suitable model within the budget.

Terms

Standards

Instruments

Temperature control accuracy of +/- 2 ℃, cooling capacity up to 3240W, equipped with fully enclosed Air-Cooled Compressor and anti-corrosion circulation system, rapid temperature rise and fall, support large capacity Bath and external circulation function.

$ 3151.00

With heating and cooling function, Temperature range -10~ 150 ℃, Temperature Fluctuation +/- 0.05~ 0.1 ℃, Pump Flow rate 12L/min, Support internal and external circulation and remote communication, corrosion resistant design.

$ 974.00

Temperature range covers -50 to 200 ° C, supports 200 ° C direct start cooling without damaging the Compressor; uses a heat-free centrifugal circulation pump and U-shaped return design to ensure Temperature Uniformity +/- 0.05 ° C; provides a variety of Safety protection such as low water level and temperature runaway alarm.

$ 2044.00

Adopting 5 inch Touchscreen integrated display, PID intelligent temperature control technology automatically sets paraMeters, Compressor unit cooling and cooling quickly, domestic circulation makes the temperature uniform, external circulation can establish external thermostatic field, slot volume 6L.

$ 985.00

The use of non-heat centrifugal circulation pump to avoid affecting the temperature field, Temperature Uniformity of +/- 0.05 ℃, support 200 degrees of high temperature directly start cooling, domestic circulation system to achieve a high degree of uniformity in the flow field, to ensure a stable liquid environment.

$ 6902.00

Adopt non-heat centrifugal circulation pump to avoid its own heat generation affecting the temperature field, Temperature Uniformity of +/- 0.05 ℃, support 200 degrees high temperature direct start cooling without damaging the Compressor, equipped with 13L/min external circulation Flow rate.

$ 3854.00

The double Compressor cascade refrigeration system is adopted, with fast cooling and low noise, Temperature Fluctuation +/- 0.05 ° C, and pump Flow rate of 8L/min to ensure the uniformity of liquid in the Tank and reliable operation.

$ 1368.00

Temperature range -10~ 100 ℃, temperature control accuracy +/- 0.2 ℃, support multi-stage programming and internal and external circulation, provide over-temperature and low temperature sound and light alarm and liquid level protection.

$ 1450.00

Adopt non-heat centrifugal circulation pump to avoid its own heat pRoduction, Temperature Uniformity +/- 0.05 ℃, support 200 degrees high temperature direct start cooling without damaging the Compressor, equipped with 13L/min external circulation Flow rate to ensure stable insulation field.

$ 2671.00

Temperature control accuracy +/- 2 ℃, cooling capacity up to 1860W, equipped with large capacity open Bath and external circulation system, using anti-corrosion material circulation pipeline, lifting temperature fast and reliable operation.

$ 1810.00

Temperature range -20~ 100 ℃, Temperature Fluctuation +/- 0.05~ 0.1 ℃, using proportional refrigeration technology and PID control, support internal and external circulation and programmed operation, with low liquid level and over temperature protection, suitable for a variety of application environments.

$ 2287.00

Using PT100 platinum resistance imported from Japan to measure temperature, the fully enclosed Compressor has low operating noise and high cooling efficiency, Temperature Fluctuation +/- 0.1 ℃, supports internal and external circulation and 4L/min pump Flow rate, stable and reliable temperature control.

$ 948.00

Double Compressor cascade refrigeration system is used to achieve rapid cooling, Tank volume 6L with 8L/min pump Flow rate to ensure liquid uniformity, Temperature Fluctuation control within +/- 0.05 ℃, Precision Pt100 Sensor to ensure long-term stable operation.

$ 2203.00

Temperature range -30~ 100 ℃, temperature resolution 0.1 ℃, Tank volume 15L, fully enclosed Compressor cooling and overheating overcurrent protection, stainless steel 304 material for easy cleaning.

$ 2074.00

The centrifugal circulation pump without heat is adopted to reduce the influence of temperature field, and the U-type reflux circulation realizes Temperature Uniformity +/- 0.05 ℃. It has safety devices such as power-off protection and low water level alarm, and can choose multi-stage temperature control program.

$ 1222.00

Articles

The main difference between the high-low temperature test chamber and the constant temperature and humidity test chamber
This article mainly distinguishes between high-low temperature test chambers and constant temperature and humidity test chambers.
Rapid temperature change high and low temperature test chamber for thermal fatigue evaluation of PCB board solder joints.
This paper discusses the application of rapid temperature change high and low temperature test chambers in evaluating the thermal fatigue of PCB board solder joints. Solder joint fatigue is primarily caused by differences in material thermal expansion, and the test chamber simulates thermal stress through temperature cycling to accelerate the fatigue process.
Application of Three-Chamber High and Low Temperature Test Chambers in Rapid Temperature Cycling for Electronic Products
The three-chamber high-low temperature test chamber is used for reliability testing of electronic products, enabling rapid temperature transitions through independent high temperature, low temperature, and test zones. Compared to traditional single-chamber equipment, it reduces temperature change time and enhances testing efficiency.
High and low temperature alternating test chamber for measuring low-temperature embrittlement temperature of plastics
This article introduces how to use a high-low temperature alternating test chamber to determine the low-temperature brittleness temperature of plastics.
Thermal shock test chamber measures the thermal shock resistance of polymer films.
This article introduces how to test the thermal shock resistance of polymer films using a thermal shock test chamber. The test involves rapidly switching the film between high and low temperatures to simulate the drastic temperature changes that may occur in actual use, thereby generating thermal stress within the material.
Thermal Shock Test Chamber Measures Film's Temperature Change Resistance
The thermal shock test chamber creates thermal stress inside the film by rapidly switching between high and low temperature environments, testing its resistance to temperature changes. During the test, key parameters such as temperature range and dwell time need to be set, and the film is observed for issues such as cracking or performance degradation.
Flash point tester for determination of closed cup flash point of varnish
This article introduces the method for determining the closed-cup flash point of varnish using a flash point tester. The flash point refers to the minimum temperature at which the vapor on the surface of the varnish ignites momentarily when exposed to a flame after heating. It is a crucial indicator for assessing the fire risk during its production, storage, and transportation.
Thermal Shock Test Chamber Evaluates Coating Thermal Stability
The thermal shock test chamber simulates sudden temperature changes by rapidly switching between high and low temperature environments, used to evaluate the thermal stability of coatings. In practical applications, coatings may develop internal stresses due to drastic temperature fluctuations, leading to issues such as cracking and peeling.
The necessity of explosion-proof high and low temperature test chambers in lithium battery testing
Lithium batteries pose a risk of thermal runaway or even explosion when tested under extreme temperatures. Explosion-proof high-low temperature test chambers, designed with pressure relief structures, explosion-proof electrical components, and intelligent monitoring systems, can safely release energy and ensure the safety of the testing process.
Key Points for Selecting Low-Temperature Test Chambers in Rubber and Plastic Brittleness Temperature Testing
In the testing of brittle temperature for rubber and plastics, the selection of a low-temperature test chamber must ensure testing accuracy. When choosing the equipment, it is essential to consider various parameters comprehensively based on the requirements of the testing standards.
The flash point tester measures the safety baseline value of the solvent.
The flash point refers to the minimum temperature at which the vapor of a flammable liquid can be ignited. It is not a fixed value but depends on the testing method and instrument. Data measured by flash point testers serve as a critical basis for evaluating the fire risk of solvents and establishing standards for safe storage and operation.
Safety Regulations for Closed Cup and Open Cup Methods for Testing the Flash Point of Coatings.
This article introduces two main testing methods for the flash point of coatings: the closed-cup method and the open-cup method. The flash point refers to the lowest temperature at which the vapor of a coating momentarily ignites upon encountering an open flame, serving as a critical indicator for assessing the risk of fire and explosion.
Tensile Testing Machine Evaluates High and Low Temperature Tensile Properties of Hot Melt Adhesive
This article introduces how to use a tensile testing machine to test the tensile properties of hot-melt adhesives at different temperatures. The performance of hot-melt adhesives varies with temperature: they may soften at high temperatures and become brittle at low temperatures.
The essential difference between thermal shock test chambers and high-low temperature alternating test chambers.
Both thermal shock test chambers and temperature cycling test chambers are used to test the temperature resistance of products, but their core differences lie in the method and purpose of temperature change.