Adopt biaxial planetary motion structure, revolution 0-70rpm and rotation 0-80rpm adjustable, equipped with automatic wall scraping device to achieve no dead point mixing, Total Power 6.75kw to meet a variety of material handling needs.
Adopting a planetary two-way swirl/spin structure, the mixing arm runs in reverse with the basket to achieve rapid mixing, with a maximum load of 300g and a speed range of 400-2800rpm. The equilibrate is quiet and can be operated directly in the syringe or test bottle.
The digital vacuum Gauge is used to automatically control the Vacuum Level, with an accuracy of +/- 1%; the heating element is located in the Shelf of the box to shorten the heating time by 50%; the special aluminum shelf conducts heat quickly and does not oxidize at high temperature, effectively improving the drying efficiency.
Cuboid Studio improves space utilization, tempered double-decked Glass door for easy observation. Temperature control accuracy +/- 1 ℃, Vacuum Level up to 133Pa, support inert gas environment to prevent oxidation, equipped with solenoid valve and digital vacuum Gauge.
Cuboid Studio improves space utilization, temperature control accuracy of +/- 1 ℃, temperature resolution of 0.1 ℃. Tempered double-decked Glass door for easy observation, digital vacuum Meter automatically controls Vacuum Level to 133Pa, supports inert gas environment anti-oxidation.
Equipped with programmed vacuum cycle function, drying time is shortened by more than 50%, temperature control accuracy +/- 1 ℃, support 7 groups of 63-step Program settings, digital Vacuum Level control accuracy +/- 1%.
Adopting a six-axis planetary stirring structure, including two sets of high-speed dispersers and low-speed twist paddles, with a revolution speed of 0-80rpm and a rotation speed of 0-3800rpm, it can achieve no dead-angle mixing, with a Vacuum Level of -0.098MPa, suitable for materials with a viscosity of up to 1 million mPa · s.
The digital vacuum Gauge is used to automatically control the Vacuum Level, with accuracy +/- 1%; the heating element is located in the Shelf of the box to shorten the heating time by 50%; the aluminum shelf conducts heat quickly and does not oxidize at high temperature; it can be filled with inert gas to prevent oxidation.
With programmed vacuum cycle control, the maximum number of cycles is 99 times, and the drying time is shortened by more than 50% compared with the traditional method; equipped with a digital vacuum Gauge, the control accuracy is +/- 1% to ensure a stable vacuum environment.
Adopting the principle of planetary motion, the grinding time only takes 15-20 minutes, the discharge particle size reaches 0.1 micron, supports dry grinding, wet grinding, vacuum grinding and other methods, and is equipped with a 200CFM heat dissipation system and a low center of gravity design to ensure stable operation.
360 degree tumbling structure combined with planetary disk swirl/spin, maximum Processing capacity 80L, minimum discharge particle size 0.1μm, support dry grinding, wet grinding, vacuum and other grinding methods, equipped with a variety of materials ball mill Tank to adapt to different samples.
With programmed vacuum cycle control, it can set the range of 50~ 900Pa Vacuum Level, and the drying time is shortened by more than 50%; it adopts digital vacuum Meter automatic control, accuracy +/- 1%, and supports 7 groups of 63-step temperature programming.
The 360-degree tumbling structure combined with planetary disk motion, the maximum Processing capacity is 40L, and it supports various methods such as dry grinding and wet grinding vacuum grinding, which can reach 0.1 μm discharge particle size and improve grinding uniformity and efficiency.
Using the principle of planetary motion, the grinding time is only 15-20 minutes, and the discharge particle size is up to 0.1 micron; it supports dry grinding, wet grinding, vacuum grinding and other methods, equipped with four-station design, Rotation speed 800rpm, suitable for various sample characteristics.
360 ° tumbling structure combined with planetary disk swirl/spin, maximum Processing capacity 16L, support dry and wet grinding vacuum grinding, can reach 0.1 μm discharge particle size, with a variety of ball mill Tank material and grinding mode selection.
