Equipped with 7-inch TFT display, supports 5 ion Measuring methods, automatically recognizes ion selective ElectRode, Measurement accuracy +/- 1% F.S., can store 1000 sets of data, suitable for a variety of Ion concentration and water Hardness detection.
Suitable for Ammonia Gas sensing electRode maintenance, capacity 480mL, Water Hardness Detection dedicated to ensure ElectRode performance stability, prolong service life.
Suitable for materials such as high Hardness rubber and engineering plastics, pressing needle Travel 0~ 2.5mm, Measurement range 0~ 100HD, error +/- 1HD, in line with ASTM D 2240-05 and GB/T2411-2008 standards.
Travel range 0~ 2.5mm, resolution 1HD, suitable for high-Hardness rubber and engineering plastics and other materials on-site determination, in line with multinational standards.
Travel pin 0~ 2.5mm, resolution 1HA, measurement error +/- 1HA, suitable for field Hardness measurement, in line with multinational standards.
It adopts 45 ° fixed angle design, loads 1000g +/- 10g, and evaluates Hardness by scratching coatings with different Hardness pencils, which is easy to operate and accurate.
Hand crank type is easy to operate, load 1000g +/- 1g, scratch speed about 1mm/s, test angle 45 °, standard 6B-6H pencil, in line with a number of international standards, through the pencil Hardness grade to accurately evaluate the scratch performance of the paint film.
The pencil scratch method is used to test film Hardness, and the three-point contact design always guarantees a 45 ° angle, which meets the GB6379 standard and is suitable for film Hardness detection in laboratories and construction sites.
Manual measurement of film Hardness, test angle 45 °, load 1 +/- 0.05kg, three-point contact with the measured surface, suitable for inspection in any direction.
Using LED test technology, signal stability, support multi-point calibrating and GLP specification, Measurement range Water Hardness 0.000-500.0mg/L, urea 0.000-5.000 mg/L, compact and easy to carry.
Travel range of the crimp is 0~ 2.5mm, measurement error is +/- 1HAO, and the end pressure of the crimp is 0.55~ 8.05N, which is suitable for accurate Hardness detection of low Hardness rubber materials.
Manual measurement of paint film Hardness, load 500g, test angle 45 °, can be inspected in any direction, three points contact with the measured surface.
Manual measurement of paint film Hardness, load 1000g, test angle 45 °, three-point contact with the tested surface design, suitable for inspection in any direction.
Using two-wheel and refill three-point contact structure, refill and test surface to maintain an angle of 45 degrees, equipped with 1000g weight, by pushing the Tester to accurately determine the film Hardness value, easy and reliable operation.
Using 45 ° fixed angle design, ensure that the cylindrical pencil lead scratches the coating with constant pressure, the load is 750g, the error is +/- 10g, and the coating grade is determined by the minimum trace Hardness value.
