Horizontal operation prevents the sample from sinking to the bottom, and the ground is more uniform; four working stations can handle different materials at the same time; the grinding time only takes 5-10 minutes, and the minimum discharge particle size reaches 0.1 μm; It has a variety of functional modes such as positive and reverse alternating operation, stepless speed regulation, timing, etc.
Simultaneous measurement of energy, power and temperature, Light spectrum range 315nm-400nm, sampling speed up to 2048 times/second, Automatic and Manual Measurement modes supported, slim design for tight spaces.
Rotation speed up to 900rpm, discharge particle size minimum 0.1um, with forward and reverse alternating operation and intermittent grinding function, support vacuum grinding and inert gas protection, more than ten kinds of material grinding Tank to ensure no pollution.
Simultaneous measurement of UV energy, intensity and temperature, support four-band UV Power measurement, Data storage up to 60,000 Power data, high temperature design can run for a long time in 100 ℃ environment, sampling speed up to 2048 times/second.
Simultaneous measurement of energy Power temperature time, sampling speed up to 2048 times/second, built-in insulation plate resistant to 100 ° C high temperature, recording 60,000 Power data and 3800 temperature data, support data export and Linear dispersion analysis.
Simultaneous measurement of UV intensity, energy and temperature, Light spectrum Response range 340nm-420nm, power range of 40000mW/cm ², equipped with high temperature protective cover to adapt to 100 ℃ environment, Support automatic and manual two Measurement modes.
Built-in High Accuracy Temperature Humidity Sensor, Temperature Error +/- 0.2 ℃, Humidity Error +/- 2.5%. Adopt Bluetooth low energy wireless transmission, support remote setting and data download, with weatherproof housing and NEMA6/IP67 Protection Rating, suitable for long-term outdoor monitoring.
Impact energy 11mJ, impact mass 7.2g, ball head Hardness 1600HV, measurable maximum Hardness 950HV, suitable for asperity 1.6μm surface, support thin layer test.
Microcomputer technology is used to automatically correct friction and wind resistance energy loss, swirl/spin encoder has high angle measurement accuracy, and displays paraMeters such as thrust energy and impact strength. Impact speed is 2.9m/s, and pendulum energy is 0.5J to 5J optional.
Measurement range covers 0-20000mW/cm ² Power and -55-125 ℃ temperature, built-in insulation supports long-term operation in 100 ℃ environment, and can record 60,000 Power data and 3800 temperature data.
Impact energy 2.7mJ, Impact mass 3.0g, tungsten carbide ball head Hardness up to 1600HV, suitable for asperity 0.4um surface, providing accurate Hardness measurement.
Impact energy up to 11mJ, ball head diaMeter 3mm tungsten carbide material, can measure the maximum Hardness 940HV, suitable for asperity 1.6μm surface, minimum coupling thickness 5mm, portable design.
High Accuracy swirl/spin encoder is used to collect angle and speed information, the angle resolution reaches 0.075 °, the wind resistance error is automatically corrected, the Impact speed is 3.5m/s, and the pendulum energy can be selected from 1J to 5.5J to improve the test accuracy and efficiency.
Using Bluetooth low energy technology, support wireless settings and data download, waterproof depth of 30 Meters, accuracy of +/- 0.5 ℃, Storage capacity of 98,000 measurements, users can easily replace the battery.
Impact energy 90mJ, Impact mass 20g, can detect the maximum Hardness 650HV, Cedar depth 41-53μm, suitable for asperity 6.3μm surface.
