Adopt electric lift design, lift Travel up to 500mm; Equipped with 2200W three-phase asynchronous motor, Speed range 0-2800rpm; Support four rotation stator head replacement, adapt to different viscosity material handling needs.
Special rotor-stator structure is adopted to achieve stepless speed regulation of 60-2800rpm, 720mm electric lift Travel, material withstands high-frequency shearing, and fine emulsification dispersion is completed in a short time.
Hydraulic system for coating detachment measurement, accuracy of +/- 1% full scale, optional 10mm to 50mm spindle and self-positioning function, suitable for smooth rough surfaces without affecting the results.
Adopting a single-arm double-column structure, equipped with a hydraulic buffer device to improve service life and stability, with a drop height range of 400 to 1500mm, it can test up to 80kg specimens, meeting a variety of standard testing requirements.
Adopting double column guide and hydraulic buffer system, the drop height range can be set from 0 to 2000mm, the maximum load is 300kg, and it supports all-round drop testing of edge angles and has upper and lower induction protection devices.
Hydraulic system measurement coating adhesion, accuracy control within +/- 1% full scale, optional 10mm to 50mm more than the kit size, self-positioning characteristics to ensure smooth rough surface measurement results accurate and reliable.
The fully automatic electronically controlled hydraulic pump provides smooth and continuous pulling force with +/- 1% accuracy, built-in rechargeable battery supports 200 tests, and IP65 Protection Rating ensures durability.
Hydraulic system to achieve the measurement of coatings, accuracy control within +/- 1%, with self-positioning kit design, optional 10mm to 50mm kit size, Portable structure is suitable for all kinds of places.
Aluminum alloy body and micro hydraulic system, Range 0~ 6.000KN, Continuous Operating Time more than 200 hours, with 5-segment fold line correction and dual Measurement mode to ensure Test accuracy and Stability.
Adopt small hydraulic force measuring device, drawing force up to 40KN, cylinder Travel 10mm, with a machine multi-purpose, novel structure, compact size, complete functions and other characteristics, high detection accuracy, support strength Mpa and force value KN two Measurement mode.
Hydraulic automatic pull-off test, the pull-off speed is stable and controllable, the accuracy is +/- 1% full scale, equipped with pull-off kit size 10-50mm, built-in rechargeable battery and 200,000 Data storage.
Hollow self-resetting hydraulic cylinder design, center aperture 18mm, maximum pull-out force 20kN, compact structure and can be connected by quick connector, suitable for a variety of anchorage inspection.
Using high-speed swirl/spin rotor and precision stator to pRoduce strong hydraulic shearing and centrifugal extrusion, Speed range 50-6000rpm, Processing capacity 5-30L, with electric lift and emergency stop protection function.
Hollow self-resetting hydraulic cylinder design, central aperture 27mm, maximum pull-out force 50kN, compact structure and can be connected by quick connector, manual pump versatility.
The hydraulic pump provides a pressure of 50 to 200 bar to ensure that the sample is tight, and the cavity can be lengthened to inlay two samples at the same time. The unique hot and cold separation design ensures safety, and the double sample inlay can be completed in as little as 7 minutes.
