External-attached Thermometer

The external adhesive thermometer measures temperature by having its sensor come into contact with the surface of an object, converting thermal signals into electrical signals for display. It is commonly used to monitor the surface temperature of equipment such as pipelines and storage tanks, and is frequently found in the food processing and chemical industries.
Selection
When selecting, consider that the temperature measurement range should cover the usage requirements, the accuracy should meet the process demands, the probe material should be compatible with the characteristics of the measured surface, the protection rating should match the environmental conditions, and the response speed should align with the monitoring frequency.

Terms

Standards

Instruments

With IP67 waterproof and dustproof housing, it supports external Probe measurement in the range of -40 to 125 ° C, and can store up to 16,000 readings in a single channel, with high and low temperature alarm LED indicators.

$ 272.00

With dual functions of internal and external circulation, Temperature Fluctuation ≤ +/- 0.2 ℃, resolution 0.1 ℃, pump flow rate 6L/min, to ensure temperature uniformity, support connection with external equipment.

$ 306.00

With External Adjustment, Weighing Stabilization time adjustable, accuracy 0.01g, support percentage weighing, counting, checking and other application modes, easy to operate.

$ 183.00

Adopting 5 inch Touchscreen integrated display, PID intelligent temperature control technology automatically sets paraMeters, Compressor unit cooling and cooling quickly, domestic circulation makes the temperature uniform, external circulation can establish external thermostatic field, slot volume 6L.

$ 985.00

Adopt magnet adsorption iron substrate, measurement range -10 ℃ to 70 ℃, diaMeter 65mm, can be used in vacuum environment and no external plastic parts.

$ 254.00

With External Adjustment, Weighing Stabilization time adjustable, support nine Shielding units, accuracy of 0.01g, suitable for a variety of weighing modes such as percentage and counting functions.

$ 170.00

With penetrating AISI 316 stainless steel Probe, easy to clean and insert semi-solid pRoducts. With CAL Check ™ boot self-check function, temperature accuracy of +/- 0.2 ℃, Measurement range covering -50.0~ 220 ℃.

$ 211.00

Measurement range of -40.0~ 125.0 ℃ and accuracy of +/- 0.2 ℃ with external stainless steel Probe. With IP67 waterproof housing, it supports high and low alarms and Data storage of up to 16000 readings, and the recording interval is adjustable.

$ 248.00

Using electromagnetic equilibrating type weighing Sensor, accuracy of 0.1mg, support external calibrating and RS232 interface connection, with automatic fault detection and four-level shock protection function, to ensure accurate and reliable weighing.

$ 359.00

Equipped with powerful pressure suction pump and external Bath connection port, temperature control accuracy +/- 0.1 ℃, pump flow 4L/min, with over-temperature, low temperature sound and light tracking alarm and liquid level protection function.

$ 1877.00

With external Adjustment, weighing range 2000g, accuracy 0.01g, support nine kinds of Shielding units, provide a variety of application modes such as percentage weighing, counting and checking, stable and reliable operation.

$ 196.00

Using external ElectRode design, Measurement accuracy of 0.01pH, support 0.1-14 pH range and 0-50 ℃ temperature measurement, small size for on-site detection and operation.

$ 112.00

External Sensor design is easy to carry, sampling speed up to 960Hz to ensure real-time accuracy, with first peak hold and four test modes, support 200 sets of Data storage and automatic calculation statistics function.

$ 569.00

Equipped with RS232 serial port to realize data communication, with counting function and external calibrating ability, weighing range 2000g, Readability 0.01g, stable time does not exceed 5 seconds.

$ 323.00

Temperature control accuracy +/- 0.1 ℃, domestic circulation direct test, external circulation provides thermostatic medium through high voltage pump, with LED display and multiple Safety protection, motor and circulation pump low heat efficiency.

$ 951.00

Articles

Application of Laboratory Scraper Heating Coating Machine in Hot Melt Adhesive Coating
This article introduces the application of a laboratory blade heating coating machine in hot melt adhesive coating. It first explains the coating process and principles, including three stages—heat conduction, fluid shear, and surface wetting—as well as the influence of temperature on adhesive viscosity.
Application of High-Temperature Viscometer in Testing the Melt Viscosity Characteristics of Hot Melt Ink
This article introduces a method for testing the melt viscosity of hot-melt ink using a high-temperature viscometer. The test employs a rotational viscometer to measure the viscosity of three ink samples at different temperatures.
Determination of Thermal Decomposition Temperature and Inorganic Filler Content in Ink by Thermogravimetric Analyzer
This article introduces how to determine the thermal decomposition temperature and inorganic filler content of ink using a thermogravimetric analyzer. During the test, a small amount of ink sample is heated in a nitrogen or air atmosphere, and the mass change curve is recorded.
Rapid temperature change high and low temperature test chamber for thermal fatigue evaluation of PCB board solder joints.
This paper discusses the application of rapid temperature change high and low temperature test chambers in evaluating the thermal fatigue of PCB board solder joints. Solder joint fatigue is primarily caused by differences in material thermal expansion, and the test chamber simulates thermal stress through temperature cycling to accelerate the fatigue process.
Application of Three-Chamber High and Low Temperature Test Chambers in Rapid Temperature Cycling for Electronic Products
The three-chamber high-low temperature test chamber is used for reliability testing of electronic products, enabling rapid temperature transitions through independent high temperature, low temperature, and test zones. Compared to traditional single-chamber equipment, it reduces temperature change time and enhances testing efficiency.
Temperature Oscillation Suppression in Reflux Synthesis Using Laboratory Stirring Heating Mantles
This article explores the causes and suppression methods of temperature oscillations in laboratory heating mantles during reflux synthesis.
Application of Transparent Constant Temperature Water Bath in Visualization of Material Thermal Deformation
The constant temperature water bath provides a stable environment for observing the deformation of materials after heating by maintaining a constant and uniform temperature of the liquid medium.
The impact of temperature uniformity in laboratory water baths on viscosity measurement
This article discusses the importance of temperature uniformity in laboratory water baths for viscosity measurement. Viscosity is highly sensitive to temperature variations, and uneven temperature distribution within the water bath can lead to deviations in measurement results.
The Impact of Cooling Circulating Water Chillers on the Temperature Stability of Digesters
The cooling circulator helps maintain a stable temperature for the digester by circulating the cooling medium, thereby improving the repeatability of experiments. Its working principle involves using a refrigeration system to lower the water temperature, and then circulating the cooled water to the digester through a circulation pump to absorb excess heat.
Guide to Selecting a Laboratory Rotational Viscometer for Coatings Development
This article introduces how to select a laboratory rotational viscometer in coatings research and development. It first explains the principle of rotational viscometers measuring viscosity based on shear resistance, and then points out that key parameters to consider during selection include measurement range, shear rate, temperature control, and rotor configuration.
High-temperature viscometer evaluates the flow characteristics of ceramic coatings before sintering.
This article introduces how to use a high-temperature viscometer to evaluate the flow characteristics of ceramic coatings before sintering. During measurement, the instrument detects changes in the viscosity of the coating sample under simulated sintering temperature conditions using rotational or oscillatory principles.
Temperature-controlled Rotational Viscometer Simulates Coating Rheology in Construction Environments
This article introduces how to use a temperature-controlled rotational viscometer to simulate construction environments in order to study the flow characteristics of coatings. The viscosity of coatings changes under different temperatures and shear conditions, which affects their application performance.
Rotation Speed of Sample Rack in Hot Air Aging Test Chamber on Color Fastness of Textiles
This article explores the influence of the rotation speed of sample racks in a hot air aging test chamber on the color fastness testing of textiles. The rotation speed affects the flow of hot air and temperature uniformity inside the chamber, thereby altering the heating conditions of the samples and leading to variations in color fastness results.
Temperature uniformity of high-temperature aging test chamber for UV resistance testing of inks
This article discusses how the temperature uniformity of high-temperature aging test chambers affects the accuracy of ink UV resistance testing. Temperature uniformity refers to the deviation in temperature at various points inside the chamber, with smaller deviations leading to more reliable test results.
Difference between Black Panel Temperature and Black Standard Temperature in Light Aging Test Chambers
In the light aging test chamber, black panel temperature and black standard temperature are two distinct temperature indicators. The black panel temperature is measured using a black metal panel sensor, reflecting the immediate heating effect on the material surface under light exposure and is significantly influenced by air convection.