Ultra-clean workbench

The ultra-clean workbench draws in air through a fan, which is then filtered by a high-efficiency filter to form vertical or horizontal laminar flow of clean air, maintaining a dust-free environment in the operating area. It is used for operations requiring high cleanliness, such as microbial inoculation and cell culture, to prevent sample contamination.
Selection
When selecting, consider matching the cleanliness level, airflow pattern, and the type of experiments. Materials should be corrosion-resistant and easy to clean. Choose an appropriate work area size based on the dimensions of the items being handled, and pay attention to noise and vibration parameters. Factor in the filter replacement cycle and after-sales service.

Terms

Standards

Instruments

Equipped with constant load weights to ensure stable loading, an adjustable level workbench that is flush with the pressure foot, and a glass tabletop that is wear-resistant and rust-proof, effectively reducing human error and improving test repeatability.

$ 211.00

The vertical design is equipped with a quasi-closed Glass damper, the average wind speed is 0.3~ 0.6m/s, the cleanliness level is 100, and the stainless steel experimental area has a built-in 2KW socket, which is convenient to operate and the environment is stable.

$ 1797.00

Vertical design to ensure cleanliness level 100, average wind speed 0.3~ 0.6m/s, adjustable air volume fan system to maintain a stable wind speed, quasi-closed Glass damper to prevent external air interference.

$ 1990.00

The noise at work is only 52 decibels, the exhaust volume is 118 liters/minute, the Nano coating cylinder liner system is adopted, no lubricating oil is required, the gas cleanliness is high, and the automatic design can realize unattended operation.

$ 557.00

Vertical design with quasi-closed Glass damper, adjustable air volume system to maintain 0.3~ 0.6m/s wind speed, stainless steel experimental area integrated 2KW socket, clean level of 100, noise control within 62dB.

$ 2781.00

The vertical design ensures a clean environment, the average wind speed is adjustable from 0.3 to 0.6m/s, the quasi-closed Glass damper prevents external air interference, and the noise is controlled within 62dB.

$ 1009.00

Noise is as low as 54 decibels at work, displacement is 155 liters per minute, pure oil-free piston system ensures clean gas, Nano coating cylinder liner enhances durability, automatic start-stop saves energy and saves electricity.

$ 832.00

Using 0.06mm ultra-fine stainless steel wire, the wire diaMeter is thinner than the common 0.07mm in the market, the bristles are soft and can be deeply cleaned without damaging the roller surface, suitable for fine cleaning applications.

$ 135.00

The integrated stainless steel workbench is corrosion-resistant and easy to clean, and is equipped with an arbitrary positioning sliding door system for flexible positioning. Average wind speed 0.3~ 0.6m/s, noise ≤ 62dB (A), with pre-Filter quick change design and interlock function.

$ 872.00

Filtrate efficiency ≥ 99.97% For particles ≥ 0.5μm, the average wind speed is adjustable from 1.2 to 2m/s, the trend purification level is up to 1000, the work surface can reach 10,000, equipped with mobile runner and adjustable jack, flexible to adapt to changing working positions.

$ 1442.00

Filtrate efficiency ≥ 99.97% for ≥ 0.5μm particles, wind speed 1.2~ 2m/s adjustable, trend thousand cleanliness, with moving runner and adjustable jack, flexible to adapt to different working position needs.

$ 1865.00

Glass damper to prevent external air interference, adjustable air volume fan to maintain 0.3~ 0.6m/s wind speed, LED LCD panel control operation is convenient, stainless steel experimental area is easy to clean and maintain.

$ 1990.00

Vertical design with quasi-closed Glass damper, adjustable air volume system to maintain 0.3~ 0.6m/s wind speed, stainless steel experimental area and 2KW socket easy to operate, clean level of 100.

$ 2717.00

The pure oil-free design ensures that the gas is clean and pollution-free, the exhaust volume reaches 608L/min to meet the high-efficiency gas supply demand, the noise control is about 45 decibels to achieve ultra-quiet operation, the automatic operation does not require special personnel to be on duty, and the optional dew point of the dryer is supported as low as -60.

$ 2550.00

With 80L/H water pRoduction capacity and 18.2MΩ · cm ultra-pure water quality, it supports regular automatic circulation and consumable life monitoring. It can disinfect and display three-way water quality with one click, prolong the service life of the ultra-pure water bag, and achieve efficient online monitoring.

$ 2834.00

Articles

Ultrasonic Thickness Gauge Selection: Technical Considerations for Probe Configuration and Measurement Modes
This article primarily introduces the technical factors to consider when selecting an ultrasonic thickness gauge. In terms of probe configuration, the frequency affects both resolution and penetration depth, while crystal size determines adaptability to curvature and surface conditions. Dual-element probes offer a smaller dead zone compared to single-element probes, and delay-line probes are suitable for thin-wall and high-temperature applications.
Vacuum adsorption coating machine solves the flatness challenge in the transfer of ultra-thin graphene films.
The vacuum adsorption coating machine transfers graphene films smoothly onto target substrates through controlled negative pressure, solving issues such as wrinkling, tearing, and contamination often encountered with traditional methods.
Superhydrophobic surface coating is applied to the microstructure substrate using a film coating machine.
This article introduces the coating process of superhydrophobic surface coatings on microstructured substrates. Superhydrophobic coatings feature high water contact angles and low rolling angles, making them widely used in applications such as anti-fouling and waterproofing.
Ultrasonic thickness gauge for detecting thick coatings and composite coatings.
Ultrasonic thickness gauges measure coating thickness using the principle of ultrasonic pulse reflection, calculating the result based on the propagation time of sound waves in the material and the speed of sound. When detecting thick coatings and composite coatings, challenges such as acoustic attenuation of the material, unknown sound speed, and signal recognition at multi-layer interfaces must be addressed.
Analysis of Causes for Excessive Repetition Error in Microbalances
Microbalance repeatability out-of-tolerance refers to the situation where the results of multiple weighings of the same object exceed the allowable range of variation.
Ultrasonic Thickness Gauge Measures the Thickness of Flexible Packaging Materials
This article introduces the principles, technical points, and operational procedures for measuring the thickness of flexible packaging materials using an ultrasonic thickness gauge. It is based on the principle of ultrasonic pulse reflection, which calculates thickness by measuring the propagation time of sound waves through the material.
The principle of measuring dry film thickness with a coating thickness gauge
Coating thickness gauges measure dry film thickness through non-destructive methods, with commonly used principles including electromagnetic induction, eddy current, and ultrasonic methods.
To determine if an ultrasonic cleaner cleans effectively, first understand the two key parameters: frequency and power.
This article mainly discusses how to achieve thorough cleaning with an ultrasonic cleaner, emphasizing that the key factors are frequency and power. The frequency determines the size and penetrating ability of the bubbles generated during cleaning, while the power provides the necessary energy for the cleaning process.