Using 0.06mm ultra-fine steel wire, soft bristles, effective cleaning of anilox rollers and Mayer Rods, to avoid surface damage, handmade to ensure mass.
Using 0.06mm ultra-fine stainless steel wire, the wire diaMeter is thinner than the common 0.07mm in the market, the bristles are soft and can be deeply cleaned without damaging the roller surface, suitable for fine cleaning applications.
Using 0.06mm ultra-fine steel wire, the bristles are soft, allowing for deep cleaning of anilox rollers and Mayer Rods to avoid surface damage, and are handmade by experienced craftsmen to ensure quality.
Adopt stainless steel mirror liner and ultra-fine fiberglass insulation, Temperature Fluctuation ≤ +/- 0.5 ℃, uniformity ≤ +/- 2 ℃, equipped with large screen Touchscreen and automatic calculation function, improve temperature and humidity control accuracy and operation convenience.
Adopt stainless steel mirror liner and ultra-fine fiberglass insulation cotton, equipped with French Taikang fully enclosed Compressor, Temperature Fluctuation ≤ +/- 0.5 ℃, support 100 sets of program editing and RS-232/485 communication, improve test stability and convenience.
Using 0.06mm ultra-fine steel wire, the bristles are soft and effective to clean without hurting the surface, the 6-line bristle design improves the cleaning efficiency, and the wooden base Film thickness 13mm ensures the operation stability.
Using 0.06mm ultra-fine steel wire, thinner than 0.07mm common in the market, the bristles are soft and do not hurt the roller surface; handmade to ensure mass, four lines of 62-hole design to improve cleaning efficiency, wooden base operation is stable.
Speed range 5000 to 35000rpm, output power 120W, support stepless speed regulation, working head with SS316L material, maximum temperature 120 ℃, suitable for micro Sample Handling, with high linear speed and shear force.
Speed range 5000~ 35000rpm, output power 120W, using SS316L stainless steel working head, providing high linear speed shear force, support micro Sample Handling and high viscosity medium.
Temperature range -60~ 150 ℃, humidity control 30~ 98% RH, using ultra-fine Glass insulation cotton and double-decked silicone rubber sealing, equipped with independent over-temperature protector and multi-layer conductive film observation window to ensure stable and safe testing.
Suitable for ultra-low conductivity water sample measurement, Glass grinder liquid interface design, pH Measurement range 0-11, Temperature range 0-80 ℃, support can add liquid reference solution.
Rotation speed up to 3000rpm, fineness of grinding up to 10 microns or less, double-decked chilled down jacket design makes the conventional temperature rise less than 10 ℃, zirconia dial drive grinding medium to achieve efficient dispersion grinding.
Using Aptina CMOS Sensor, the highest resolution is 14 million pixels, equipped with zinc-aluminum alloy housing and IR-CUT filter, supporting USB 2.0 high-speed transmission and multi-platform SDK development.
Temperature control accuracy of 0.1 ℃, Temperature Fluctuation +/- 0.5 ℃, using flat heater and low noise fan to ensure uniform temperature, silicone rubber sealing ring to ensure the sealing of the studio.
The surface of three rollers is extruded and rubbed at different speeds to achieve grinding. The diaMeter of the roller is 65mm, and the fineness of grinding can reach 15μm. It is suitable for fine grinding and dispersion of high viscosity materials.
