1000 +/- 5g dead weight and 500 +/- 5g payload combined pressure, equipped with 20 times reading Microscope to achieve 0.1mm accuracy measurement, can quantify the anti-indentation performance of coatings and support plastic deformation analysis.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Drawdown blade and bar two coating methods, with Vacuum chuck function, high film thickness control accuracy, application length and speed can be adjusted freely, clamshell Drawdown blade design is easy to clean, suitable for film and other soft substrate uniform Spreader.
The adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel ≥ 80mm. The integrity of the paint film was evaluated by seven grades, and the operation was simple and conformed to the GB/T1720 standard.
Adopt adjustable Blade Coating, high film thickness control accuracy, application length and speed can be adjusted freely, equipped with heat-resistant and scratch-resistant tempered Glass countertop, easy to clean and easy to operate.
Using bar and Drawdown blade double coating method, coating speed 1~ 300mm/s stepless speed regulation, heating temperature up to 180 ℃ +/- 1 ℃, clamshell Drawdown blade head design is easy to clean, Smoothness of countertop is tested by High Accuracy.
Support bar and Drawdown blade two coating methods, suitable for different viscosity materials. Equipped with heating and Vacuum chuck function, servo motor to ensure stable operation. Drawdown blade film thickness control accuracy is high, uniform film.
Drawdown blade and bar two coating methods, the accuracy of +/- 3μm; Drawdown blade clamshell and new bar installation design for easy cleaning, improve efficiency; support speed 1-300mm/s stepless speed and application length free adjustment; Vacuum chuck function is suitable for soft substrates such as films.
Adjustable application width, with automatic Spreader function, easy to operate, Repeatability is good, suitable for a variety of samples of laboratory prepative.
It can prepare a wet film thickness of 13.7 microns, with a wire-wound design providing stable coating performance. The 9.52 mm diaMeter ensures easy operation, making it suitable for various paint application scenarios.
Equipment integrated bar and Drawdown blade two coating methods, coating speed 1~ 300mm/s stepless adjustment, thickness accuracy of +/- 0.001mm. Using linear motor drive and hard aluminum alloy coating table, support heating function Temperature Uniformity +/- 1 ℃, meet the needs of various films.
Support bar and Drawdown blade double coating method, suitable for high, medium and low viscosity materials; coating speed 1~ 300mm/s stepless adjustable, Blade Coating accuracy +/- 3μm; equipped with innovative clamshell magnetic Drawdown blade and simple bar installation, easy to clean and load; Heating and Vacuum chuck function to improve Spreader mass.
With bar and Drawdown blade two kinds of Spreader function, using clamshell Drawdown blade for easy cleaning, application length and speed can be freely adjusted, film thickness control accuracy, suitable for a variety of materials on Glass, cardboard and other substrates Moulding.
The multi-groove coating scraper can scrape 10 wet-films of different thicknesses at one time, the thickness difference of adjacent films is 25um, and the wide film thickness range of 50-675um is supported. It is convenient to visually observe the sag situation by placing the test plate vertically.
