Adopting double roll extrusion method, Spreader Film thickness range 0.3-10 mm adjustable, accuracy up to +/- 0.05mm, equipped with handwheel adjustment and dial indicator display, dip plate is 304 stainless steel material.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
Adopting dip coating with double roll extrusion structure, Spreader thickness 0.3-10 mm adjustable, mechanical speed 1.2m/min can be slowly adjusted, built-in glue circulation system to ensure Spreader uniformity.
Hydraulic drive provides a range of 1-20kN force values, accuracy of 0.1N, extrusion Travel 200mm or 300mm, equipped with standard extrusion head and pressure relief device to ensure safe and stable testing.
Using the immersion coating method, Spreader thickness 0.3-10 mm adjustable, mechanical speed 1.2m/min, built-in glue circulation system to ensure uniform and stable Spreader.
Using dip coating process with double roll extrusion residual material, Spreader thickness adjustable, mechanical speed 0.1-1 m/min, Oven temperature 50-150 ℃ +/- 3 ℃, suitable for a variety of Coating Spreader.
Driven by hydraulic cylinder, the extrusion pressure range is 1-20kN, and the aCupuncture speed is adjustable by 10-80mm/s; the rear side of the box is equipped with an exhaust trend and pressure relief device to ensure the safety and control of the test process.
The uniform glue speed is adjustable from 100 to 7000rpm, and the time is adjusted steplessly in multiple stages. The solenoid valve control gas path is suitable for the assembly line process. The motor torque is large and the operation is smooth. Vacuum chuck ensures the stability of the substrate.
The extrusion process ensures that the bar is unbroken and easy to clean, the film thickness is 45μm, the total length is 250mm, and the 304 stainless steel material is durable and reliable.
Using extrusion molding process, film thickness 105 microns, application width 250mm, diaMeter 10mm, 304 stainless steel material to ensure durability and accurate Spreader effect.
The extrusion molding process is used to ensure continuous wire, the film thickness is precisely controlled by 20μm, the application width is 250mm to meet various needs, and the 304 stainless steel material is durable and easy to clean.
The application width can be adjusted freely, and the drawdown blade Coater can be adapted to meet different experimental testing needs and realize flexible film operation.
Spreader thickness accuracy of +/- 0.003mm, adjustable rate of 5~ 200mm/s, support Vacuum chuck and heating to 180 ℃, suitable for a variety of substrates and laboratory environments.
Using scraping method to achieve 0.005-3mm wet film thickness, Spreader accuracy of +/- 5%, equipped with hot air circulation Oven and automatic constant tension control to ensure Spreader uniformity and Stability.
Adopt double roll extrusion method to achieve 0.3-10 mm Spreader Film thickness, accuracy of +/- 0.05mm; Equipped with hot air circulation Oven, Temperature range room temperature to 200 ℃ +/- 3 ℃; Tension controller automatically controls the unwinding process to ensure the uniformity of Spreader.
