With split Probe design, equipped with F and N Probe, Measurement range 0~ 1500 microns, resolution 0.1 microns, automatic identification of substrate type, support for more than 60 readings per minute, Protection Rating IP65.
Using magnetic Induction and eddy Current dual principle, Measurement range 0-1250μm, support split probe flexible replacement, with automatic identification of matrix material function, minimum measurable surface radius 1.5mm.
Using split design, equipped with F and N Probe, Measurement range 0~ 1250μm, error +/- 3%, support automatic identification of matrix material and RS-232C interface communication, stable and reliable operation.
Split structure can be freely replaced Probe, Measurement range 0-1500 μm, accuracy +/- 1%, IP65 Protection Rating, support 1000 reading storage, suitable for a variety of ferrous metal substrate environment.
It adopts the integrated design of receiving Probe and host, easy to hold with one hand, can store more than 200,000 measurement point data, Test accuracy is +/- 1mm in the range of 20-200mm, equipped with four-wheel positioning protection device.
The split structure is equipped with a dedicated thick coating Probe, Measurement range of 0~ 13000 μm, accuracy +/- 3%, IP65 Protection Rating and high-speed measurement capability of more than 60 readings per minute.
Dedicated to Coating thickness Gauge calibrating, ensure accurate thickness measurement, suitable for F type equipment, improve Reliability.
Split Probe interchangeable, high wear resistant carbide Probe service life of more than 500,000 times. Measurement accuracy of +/- (2% + 1μm), can accurately measure platings within 10 microns, and has a variety of calibrating and statistical functions.
Split design is equipped with LCD display, Measurement range 1~ 250mm, Speed of sound 5920m/s, Coupling status prompt and Zero Adjustment, Support upper and lower tolerance setting and automatic alarm.
Using split Probe design, Probe can be plugged and interchanged, Measurement accuracy of +/- 2% H + 1 μm, high wear-resistant carbide Probe service life of more than 500,000 times, support a variety of Calibration methods and data statistics.
With split design, Probe can be plugged and interchanged, and the service life of high wear-resistant cemented carbide Probe exceeds 500,000 times. Measurement range 0-5mm, accuracy up to +/- (2% + 1μm), can accurately measure thin coatings within 10 microns.
With split design, Probe can be plugged and interchanged, and the service life of high wear-resistant cemented carbide Probe is more than 500,000 times. Measurement range 0-3000 μm, accuracy up to +/- (2% + 1 μm), and accurate measurement of thin coatings within 10 μm.
Measurement range 10-850mm, error +/- 1-3mm, equipped with 3.5 inch color screen and real-time positioning indication, support TF card storage and automatic thickness locking, easy to operate and adapt to a variety of environments.
Measurement principle using magnetic method, thickness range 0-3000μm, error +/- 3%, with split Probe structure, support single and continuous Measurement mode, equipped with RS-232C interface.
Using split Probe design, Measurement range 1.2~ 225mm, support anti-measurement Speed of sound function, Data storage and low voltage indication, suitable for a variety of material thickness measurement.
